TRENDnet TL2-F7120 User Manual page 378

TRENDnet User's Guide
4.1.199 spanning-tree mst- Properties of an interface for MSTP
Command Objective
✏
Syntax
Copyright 2023 TRENDnet. All Rights Reserved.
This command configures the port related spanning tree
information for a specified MSTI in a port.
The no form of this command resets the spanning tree
information of a port to its default value.
This command can be executed successfully, only if the spanning tree
functionality is not shutdown in the switch. The type of spanning tree
Mode should be set as mst.
spanning-tree mst <instance-id(1-64)> { cost <value(1-200000000)>| port-
priority <value(0-240)> | disable }
no spanning-tree mst <instance-id(1-64)>{cost|port-priority | disable}
TL2-F7120