Table of Contents
Advertisement
TRENDnet User's Guide
IPv6 Neighbor Discovery
System > System Settings > Neighbor Discovery Table
The IPv6 neighbor discovery table allows you automatically discover IPv6 devices
connected automatically.
1. Log into your switch management page (see
on page 9).
2. Click on System, click System Settings and click Neighbor Discovery Table.
3. In the ARP table, you can view the dynamic and static IPv6 neighbor entries that
already exist. If there is a dynamic IPv6 neighbor entry you would like to map as a static
entry, next to the entry under the Action column, click Move to Static. You can also click
Delete to remove the entry from the table.
To add a new static IPv6 neighbor entry that does not exist, click on Add.
© Copyright 2023 TRENDnet. All Rights Reserved.
"Access your switch management
page"
IPv6 Address: Enter the IPv6 address for the neighbor entry.
•
Link-layer Addr: Enter the link-layer address for the neighbor entry.
•
•
Interface: Click the drop-down list and select the VLAN interface to assign the
IPv6 neighbor entry.
Click Apply to save the entry to the table.
TL2-F7120
21
Advertisement
Table of Contents
