TRENDnet User's Guide
Command Objective
Syntax
Mode
20
copy startup-config
Command Objective
Syntax
Copyright 2023 TRENDnet. All Rights Reserved.
This command enables the telnet service in the system. The
no form of this command disables the telnet service.
ip telnet service no
ip telnet service
Global Configuration Mode
This command copies a file from a source remote site /flash to a destination
remote site/flash. The entire copying process takes several minutes and
differs from protocol to protocol and from network to network.
copy startup-config { tftp://ip-address/filename }
TL2-F7120