Table of Contents
Advertisement
TRENDnet User's Guide
Command Objective
✏
Syntax
Parameter Description
Copyright 2023 TRENDnet. All Rights Reserved.
This command displays the port related spanning tree
information for the specified interface.
The information contains port ID, port role, port state, port cost,
port priority and link type.
This command can be executed successfully, only if the spanning
tree functionality is not shutdown in the switch. The type of
spanning tree Mode should be set, if the functionality is already
shutdown.
show spanning-tree interface <interface-type> <interface-id> [{
cost | priority | rootcost | state | stats | detail }]
•
<interface-type> - Displays the port related spanning tree
information for the specified type of interface. The interface can
be:
■
gigabitethernet – A version of LAN standard architecture
that supports data transfer upto 1 Gigabit per second.
■
port-channel – Logical interface that represents an
aggregator which contains several ports aggregated
together.
•
<interface-id> - Displays the information about the specified
interface identifier. This is a unique value that represents the
specific interface. This value is a combination of slot number and
port number separated by a slash. For Example: 0/1 represents
TL2-F7120
Advertisement
Table of Contents
