TRENDnet User's Guide
4.1.63
permit udp
Command Objective
This command specifies the IPv6 TCP packets to be forwarded based on the
associated parameters.
•
Syntax
Copyright 2023 TRENDnet. All Rights Reserved.
permit udp {any | host <ip6_addr> <short(0-128)>} [eq <short (1-
65535)>] {any | host <ip6_addr> <short(0-128)>} [ eq <short (1-
65535)> ] ace-priority <integer (1-2147483647)> [dscp <short (0-
63)>]
TL2-F7120