TRENDnet TL2-F7120 User Manual page 379

TRENDnet User's Guide
Parameter
Description
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
•
<instance-id(1-64)> - Configures the ID of MSTP instance already
created in the switch.This value ranges between 1 to 64.
•
cost<value(1-200000000)> - Configures the port's path cost value
that contributes to the path cost of paths containing this particular
port. The paths' path cost is used during calculation of shortest path to
reach the root. The path cost represents the distance between the
root port and designated port. This value ranges between 1 and
200000000. The configured path cost is used, even if the dynamic
pathcost calculation feature or LAGG speed feature is enabled.
•
port-priority<value(0-240)> - Configures the priority value
assigned to the port. This value is used during port role selection
process. This value ranges between 0 and 240. This value should be set
in steps of 16, that is, you can set the value as 0, 16, 32, 48,
and so on. The MSTP puts the interface with lowest number in
forwarding state and blocks all other interfaces, if all interfaces have
the same priority value.
•
disable - Disables the spanning tree operation on the port. The
port does not take part in the execution of spanning tree
operation for preventing undesirable loops in the network.
Interface Configuration Mode
TL2-F7120