Table of Contents
Advertisement
TRENDnet User's Guide
Select the Forbidden ports to restrict from the new VLAN.
Click Apply to save the new VLAN to the table.
In the list, you can click Edit to modify an entry
Note: The default VLAN VID1 cannot be removed.
4. At the top of the right hand panel, click Apply.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied
© Copyright 2023 TRENDnet. All Rights Reserved.
PVID & Ingress Filter
Network > VLAN Settings > PVID & Ingress Filter
In this section, you can modify the port VID settings, acceptable frame types, and
ingress filtering. Please note that when setting VLAN port members as untagged under
the 802.1Q VLAN section, the port VID (PVID) setting is automatically modified in the
PVID configuration setting to match that VLAN.
1. Log into your switch management page (see
on page 9).
2. Click on Network, click on VLAN Settings, and click on PVID & Ingress Filter.
3. Select the port would like to modify and click Edit to modify an entry.
4. Review the settings for each port. Click Apply to save settings.
Port – Displays the selected port
•
PVID – Select the correct VLAN ID. Note: Required for untagged VLAN ports.
•
•
Ingress Filtering –Click the drop-down list and select Enabled to enable ingress
filtering or Disabled to disable ingress filtering.
•
Acceptable Frame Type – Click the drop-down list and select which type of
frames can be accepted.
All – The port can accept all frame types.
o
Tagged – The port can accept tagged frames only. Untagged frames
o
are discarded.
Untagged– The port can accept untagged frames and frames with
o
tagged priority information only such as 802.1p.
Note: Modifying settings in the row marked All, will apply the settings to all
ports.
TL2-F7120
"Access your switch management
page"
35
Advertisement
Table of Contents
