Table of Contents
Advertisement
TRENDnet User's Guide
Parameter
Description
Mode
4.1.116
lacp timeout
Command Objective
Copyright 2023 TRENDnet. All Rights Reserved.
•
<channel-group-number(1-8)>
specified port channel. This is a unique value that represents the specific
port-channel created. This value ranges from 1 to 8.
•
Mode
- Configures the LACP activity for the port:
-
active
- Starts LACP negotiation un-conditionally.
-
passive
- Starts LACP negotiation only when LACP packet is
received from peer.
-
on
- Forces the interface to channel without LACP. This is
equivalent to manual aggregation.
Interface Configuration Mode (Physical Interface Mode)
This command configures the LACP timeout period within which
LACPDUs should be received on a port to avoid timing out of the
aggregated link.
The no form of the command sets the LACP timeout period to its
default value.
- Adds the port as a member of the
TL2-F7120
Advertisement
Table of Contents
