TRENDnet User's Guide
Command Objective
Syntax
Mode
4.1.91
ip igmp snooping querier
Copyright 2023 TRENDnet. All Rights Reserved.
This command sets the time interval after which the switch sends a group
specific query to find out if there are any interested receivers in the group
when it receives a leave message. If it does not receive a response from the
group, the port is removed from the group membership information in the
forwarding database. This value ranges between 2 and 5.
The no form of the commands sets the group specific query interval time
to default value.
ip igmp snooping group-query-interval <2-5) seconds>
no ip igmp snooping group-query-interval
Global Configuration Mode
TL2-F7120