TRENDnet TL2-F7120 User Manual page 145

TRENDnet User's Guide
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
■
the IP Address of the network or the host that the packet is
destined for and the network mask to use with the destination
address
•
ace-priority <integer (1-2147483647)>
used to decide which filter rule is applicable when the packet
matches with more than one filter rules.
•
ack | non_ack - TCP ACK bit to be checked against the packet.
•
rst | non_rst - TCP RST bit to be checked against the packet.
•
psh | non_psh - TCP PSH bit to be checked against the packet.
•
urg | non_urg - TCP URG bit to be checked against the packet.
•
syn | non_syn - TCP SYN bit to be checked against the packet.
•
fin | non_fin - TCP FIN bit to be checked against the packet.
•
dscp <short (0-63)> - Differentiated services code point provides the
quality of service control.
IPV4 ACL Extended Access List Configuration Mode
- The priority of the filter is
TL2-F7120