TRENDnet User's Guide
Command Objective
Syntax
Mode
4.1.15
interface range
Copyright 2023 TRENDnet. All Rights Reserved.
This command configures the maximum transmission unit frame size for all
the frames transmitted and received on all the interfaces in a switch. The size
of the jumbo frame size can be increased using this command. The value
ranges between 1522 and 9216. The no form of this command sets the
maximum transmission unit to the default value in all interfaces. This value
defines the largest PDU that can be passed
by the interface without any need for fragmentation. This value is
shown to the higher interface sub-layer and should not include size of the
encapsulation or header added by the interface.
jumbo-frame <frame-size(1522-9216)>
Global Configuration Mode
TL2-F7120