TRENDnet TL2-F7120 User Manual page 321

TRENDnet User's Guide
4.1.179
snmp access
Command Objective
Syntax
Copyright 2023 TRENDnet. All Rights Reserved.
This command configures the SNMP group access details. To configure an
SNMP access along with the group, a group must have already been created
using the snmp group command.
The no form of the command removes the SNMP group access details.
snmp access <GroupName> {v1 | v2c | v3 {auth | noauth | priv}} [read
<ReadView | none>] [write <WriteView | none>] [notify <NotifyView |
none>]
no snmp access <GroupName> {v1 | v2c | v3 {auth | noauth | priv}}
TL2-F7120