TRENDnet User's Guide
Command Objective
✏
Copyright 2023 TRENDnet. All Rights Reserved.
This command configures the port related spanning tree information for
all kinds of STPs. This can be applied for any port, in RSTP/MSTP Mode.
This command creates port in STP when Automatic Port Create feature is
disabled.
The no form of this command resets the port related spanning tree
information to its default value. The port related spanning tree information is
changed to its default value even if the spanning tree Mode is changed. This
command also deletes port in STP when Automatic Port Create feature is
disabled.
In STP module, whenever a port is mapped to any context, the
corresponding port is created irrespective of whether STP is
intended to be enabled on that interface. This leads To STP
scaling issues and this problem is solved by having control at STP module
on the port entry creation at STP module itself.
TL2-F7120