TRENDnet TL2-E284 User Manual
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Switch
  5. TL2-E284
  6. User manual

TRENDnet TL2-E284 User Manual

Hide thumbs Also See for TL2-E284:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for TRENDnet TL2-E284

Summary of Contents for TRENDnet TL2-E284

  • Page 2: Table Of Contents

    Table of Contents CHAPTER 1 PREFACE..........................1-1 ............................1-1 BOUT UIDE .............................. 1-1 ERMS SAGE CHAPTER 2 PRODUCT INTRODUCTION ....................2-1 ..........................2-1 RODUCT NTRODUCTION ............................... 2-1 RONT ANEL ..............................2-2 ANEL CHAPTER 3 HARDWARE INSTALLATION ....................3-1 CHAPTER 4 USING THE WEB USER INTERFACE .................
  • Page 3 MSTP Global Configuration ............................ 6-8 MSTP Timers Configuration ............................ 6-9 CIST Settings ................................. 6-10 MSTP VLAN Mapping ............................6-11 MSTP Port Settings ..............................6-11 MSTP CIST Port Status ............................6-11 RSTP ................................. 6-12 RSTP Global Configuration ........................... 6-12 RSTP Configuration ............................... 6-12 RSTP Port Status Configuration ..........................
  • Page 4 CHAPTER 10 SWITCH STATISTICS ....................10-10 ..........................10-10 WITCH TATISTICS ..........................10-10 NTERFACE TATISTICS ..........................10-11 THERNET TATISTICS VLAN S ............................. 10-11 TATISTICS MSTP ..............................10-12 MSTP Information ............................... 10-12 MSTP CIST Port Statistics ........................... 10-12 MSTP MSTI Port Statistics ..........................10-12 RSTP ...............................
  • Page 5 ..............................13-1 USERNAME ............................... 13-1 SHOW USERS ..............................13-2 LISTUSER CHAPTER 14 MANAGEMENT VLAN COMMAND ................... 14-1 VLAN C ......................14-1 ANAGEMENT OMMAND ..........................14-1 MANAGEMENT VLAN LIST ........................... 14-1 SHOW MANAGEMENT VLAN CHAPTER 15 IP SETTINGS COMMAND ....................15-1 IP S ........................
  • Page 6 SSL C ............................ 19-1 OMMAND ............................19-1 IP HTTP SECURE ..............................19-2 DEBUG SSL ..........................19-3 SHOW SSL SERVER CERT ......................19-4 SHOW IP HTTP SECURE SERVER STATUS CHAPTER 20 SYSTEM LOG COMMAND ..................... 20-1 ........................20-1 YSTEM OMMAND ..............................20-1 COPY LOGS ..............................
  • Page 7 ........................26-2 SWITCHPORT INGRESS FILTER ............................26-2 SWITCHPORT PVID ................................ 26-3 PORTS ..............................26-4 DEBUG VLAN ..............................26-4 SHOW VLAN ..........................26-7 SHOW VLAN DEVICE INFO ..........................26-8 SHOW VLAN PORT CONFIG CHAPTER 27 DYNAMIC VLAN COMMAND ..................27-1 VLAN C ........................
  • Page 8 ........................... 30-3 LACP PORT PRIORITY ............................. 30-4 LACP TIMEOUT ............................30-4 LACP WAIT TIME .......................... 30-5 SHUTDOWN PORT CHANNEL ..........................30-5 SHOW ETHERCHANNEL ..............................30-9 SHOW LACP ......................30-10 SHOW INTERFACES ETHERCHANNEL CHAPTER 31 802.1X COMMAND ......................31-1 802.1X C ..........................
  • Page 9 ....................... 33-4 SHOW MAC ADDRESS TABLE AGING TIME ......................33-5 SHOW MAC ADDRESS TABLE COUNT ..................33-5 SHOW MAC ADDRESS TABLE DYNAMIC MULTICAST ..................... 33-6 SHOW MAC ADDRESS TABLE DYNAMIC UNICAST ..................... 33-7 SHOW MAC ADDRESS TABLE STATIC MULTICAST ....................33-8 SHOW MAC ADDRESS TABLE STATIC UNICAST...
  • Page 10 ........................40-3 SHOW VLAN TRAFFIC CLASSES ..........................40-4 SHOW VLAN PORT CONFIG ..............................40-5 SHOW DSCP ..........................40-5 SHOW COSQ ALGORITHM CHAPTER 41 RMON COMMAND ......................41-1 RMON C ..........................41-1 OMMAND ..............................41-1 SET RMON ............................... 41-1 RMON ALARM ...............................

  • Page 11: Chapter 1 Preface

    Preface About This Guide This guide provides instructions on how to install and configure the TL2-E284 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots. This guide is mainly divided into four parts: 1. Hardware Installation: Step-by-step hardware installation procedure.

  • Page 12: Chapter 2 Product Introduction

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 2 Product Introduction Product Introduction The TL2-E284 is a Layer 2 Managed Switch with 24-10/100Mbps Ethernet ports and 4-10/100/1000Mbps Gigabit Ethernet ports shared with 2-10/100/1000Mbps Mini-GBIC slots. Front Panel...

  • Page 13: Rear Panel

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots 10/20Mbps (Half/Full Duplex) Connected (per Solid port) 10M Link/ACT Amber 10/20Mbps (Half/Full Duplex)Data Blinking Transmitting/Receiving (per port) No connection to the port Shared Gigabit Ethernet (RJ-45) Color Sequence Definition...

  • Page 14: Chapter 3 Hardware Installation

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 3 Hardware Installation This chapter provides unpacking and installation information for TL2-E284. Unpacking Open the shipping carton and carefully unpack its contents. Please consult the packing list located in the User Manual to make sure all items are present and undamaged.
  • Page 15 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots rack. Figure 3 – Mount the Switch in the rack or chassis Safety Instructions Caution A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient.

  • Page 16: Using The Web User Interface

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 4 Using the Web User Interface After a successful physical installation, you can configure the Switch, monitor the network status, and display statistics using a web browser. Supported The embedded Web-based Management currently supports the following web Browsers...
  • Page 17 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 7 – Enter the IP address 192.168.10.200 in the web browser The default user name and password are: Note User Name Password Privilege admin admin guest guest123 After login successfully, following page will appear.
  • Page 18 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Main Configuration Screen. The Device Status provides a real-time switch port link status. By choosing different functions in the Function Tree, you can change all the settings in the Main Configuration Screen.

  • Page 19: Configuring System Basic Functions

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 5 Configuring System Basic Functions System Basic Function List  System Information  User Account  Management VLAN  Management IP Settings  IP Authorized Manager ...

  • Page 20: User Account

    The hardware version of this device. Firmware Version The firmware version of the device. Device Name The name of the device. Default is TL2-E284. Device Contact The identification information of a contact person. Default is SysContact. Device Location Entering the device location description. Maximum of 50 characters is allowed and a null string is not accepted.

  • Page 21: Management Ip Settings

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 11 – System > Management VLAN Parameter Description Management VLAN The VLAN ID of management VLAN. It can be a single VLAN ID from 1 to 4094, a range of VLAN IDs separated by a hyphen (-) ,or a series of non-continuous numbers divided by a comma (,) Click ADD to submit the changes and the Remove button will remove an existed VLAN ID.

  • Page 22: Snmp

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 13 – System > IP Authorized Manager Parameter Description IP Address IP address of authorized manager Subnet Mask Subnet mask of the authorized IP address Port List (Incoming) Interface of the authorized administrator is allowed to connect to VLANs Allowed...

  • Page 23: Snmp Group Access Table Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots SNMP Version Specify the SNMP version to be used, which can be v1, v2c, or v3. Select „encrypted’ if the encryption for user authentication is needed. Once the encryption is enabled, then you can set the authentication and privilege algorithm and passwords.

  • Page 24: Snmp View Table Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots SNMP View Table Configuration This page is to create a SNMP view, which limits the range of MIB objects that a SNMP administrator can access to. Figure 16 –...

  • Page 25: Snmp Host Table

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Click ADD to submit the changes and the Reset button will clear the information. Select and click Delete to remove an existed entry. SNMP Host Table This page is to create a host that can access the device by SNMP protocol.

  • Page 26: Ssl Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 20 – System > SSH Parameter Description SSH Status Select Enable or Disable to turn on or off the SSH server function. Default is enabled. Version Specify the SSH version supported.

  • Page 27: System Log Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots System Log Configuration This page is to configure system log settings. Figure 22 – System > System Log Parameter Description Syslog Status The status of syslog server function. Default is enabled. Time Stamp Specifies if time stamp is attached with syslog messages.

  • Page 28: Sntp Daylight Saving Time

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 23 – System > SNTP > Time Settings Parameter Description Current Time Current system time. SNTP Status To enable/disable the Simple Network Time Protocol (SNTP) function. Default is disabled.

  • Page 29: Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots (Month:Day:HH:MM) Click Apply to submit the changes. Configuration Save Configuration This page is used to save the running configuration. Figure 25 – System > Configuration > Save Parameter Description Save option...

  • Page 30: Erase Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 26 – System > Configuration > Restore Parameter Description Restore Option Options to restore the startup configuration: No Restore: Applying this option will reset the NV-RAM to default settings. Note: This will only reset the settings in NV-RAM, not the entire device configuration.
  • Page 31 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots reset to defaults. Requires a manual device reboot for changes to take effect. Please reference the default NV-RAM parameters below.  Default IP Address : 192.168.10.200 ...

  • Page 32: Reboot

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Click Upgrade to upgrade the device firmware. Reboot This page is to reboot the system. Figure 28 – System > Reboot Click Reboot to warm start the device. If the Switch reboots without write the running configurations, the last Note configuration wrote in NV-RAM will be loaded.

  • Page 33: Configuring Layer 2 Management Functions

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 6 Configuring Layer 2 Management Functions Layer 2 Management Function List  Port Manager Port Basic Settings Port Monitoring Port Control  VLAN VLAN Basic Information VLAN Port Settings Static VLAN Configuration ...

  • Page 34: Port Manager

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Port Manager Port Basic Settings This page is to configure basic settings of switch ports. Figure 29 – Layer2 Management > Port Manager > Basic Settings Parameter Description Port...

  • Page 35: Port Control

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 30 – Layer2 Management > Port Manager > Port Monitoring Parameter Description Status To enable/disable the port monitoring session on the device. Default is disabled. Monitoring Port Specify the source port of the mirror session.
  • Page 36 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 31 – Layer2 Management > Port Manager > Port Control Parameter Description Port Specify the switch port to be configured. Mode To enable/disable auto-negotiation function on ports. Default is Auto. Duplex To set the port duplex mode.

  • Page 37: Vlan

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots VLAN VLAN Basic Information This page is to configure the basic settings of virtual local area network (VLAN) on the device. Figure 32 – Layer2 Management > VLAN > Basic Information Parameter Description VLAN Mode...

  • Page 38: Static Vlan Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Parameter Description Port Specifies the switch port which is to be configured. PVID To set the port VLAN ID of the port, all ingress untagged or priority tagged packet from this port will be assign to this VLAN.

  • Page 39: Dynamic Vlan Port Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 35 – Layer2 Management > Dynamic VLAN > Dynamic VLAN Global Configuration Parameter Description Garp System Control Choose Start to enable GARP function, and Shutdown to disable it. It is needed for using dynamic VLAN function.

  • Page 40: Garp Timers Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Click Apply to submit the changes. GARP Timers Configuration This page is to set the GARP timers on an interface. Figure 37 – Layer2 Management > Dynamic VLAN > Port Settings Parameter Description Port No...

  • Page 41: Mstp Timers Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 38 – Layer2 Management > MSTP > Global Configuration Parameter Description System Control To activate or shutdown the MSTP function. Select Start to activate the MSTP function, Shutdown to shutdown MSTP function.

  • Page 42: Cist Settings

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots is 20. Forward Delay Specify the time period in second that a port changes the STP state from blocking to forwarding. The possible value is 4-30. Default is 15. Transmit Hold Count Specify the hold counter to limit maximum transmission rate of the Switch.

  • Page 43: Mstp Vlan Mapping

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots function, False to disable it. Default is false. Click Apply to submit the changes. MSTP VLAN Mapping This page is to configure the MST Instance and VLAN mapping. Figure 41 –...

  • Page 44: Rstp

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 43 – Layer2 Management > MSTP > CIST Port Status Click 1-12, 13-24, 25-28 to display the statistics for corresponding ports. RSTP RSTP Global Configuration This page is to configure the RSTP global settings.

  • Page 45: Rstp Port Status Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 45 – Layer2 Management > RSTP > Basic Settings Parameter Description Priority Specify the bridge priority of spanning tree. Default is 32768. Version Select the spanning tree compatibility version. The possible options are STP Compatible or RSTP Compatible.

  • Page 46: Rstp Port Status

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Parameter Description Select Select a port to apply the changes. Port Port ID. Port Role Specify the current role of the port. Port Priority Specify the spanning tree port priority. Possible value is 0-240. Default is 128. RSTP Status To enable or disable the RSTP on this port.

  • Page 47: Portchannel Interface Basic Settings

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 48 – Layer2 Management > LA > Basic Settings Parameter Description System Control To activate or shutdown link aggregation function of the Switch. Select Start to activate link aggregation function, Shutdown to shutdown it.

  • Page 48: La Port Settings

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 50 – Layer2 Management > LA > Port Channel Settings Parameter Description Port Channel ID Select a configured port channel group to submit the changes. Action Type To add or delete ports from/to a port channel.

  • Page 49: La Port Statemachine Information

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Parameter Description Select Select a port to submit the changes. Port Port ID. Port Priority Specify the link aggregation port priority of this port. Possible values are 0-65535.

  • Page 50: 802.1X Basic Settings

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Click Apply to submit the changes. 802.1X 802.1X Basic Settings This page is used to configure the 802.1X authentication global settings. Figure 54 – Layer2 Management > 802.1X > Basic Settings Parameter Description System Control...

  • Page 51: 802.1X Timer Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Parameter Description Select Select a port to apply the configuration changes. Port Port ID. Port Control To set the authenticator control on this port. The possible options are: ForceUnauthorized - All traffic is blocked to the port.

  • Page 52: 802.1X Local Authentication Server Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 56 – Layer2 Management > 802.1X > Timers Parameter Description Select Select a port to apply the configuration changes. Port Port ID. Quiet Period (secs) The period that Switch will not do anything after a failed authentication.

  • Page 53: Radius Server Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Click Apply to submit the changes to existing user account, Delete to delete one. RADIUS Server Configuration This page is to configure the details of RADIUS server. Figure 58 –...

  • Page 54: Igmp Snooping

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots IGMP Snooping IGMP Snooping Configuration This page is to configure the IGMP Snooping global settings. Figure 59 – Layer2 Management > IGMP Snooping > Basic Settings Parameter Description System Control...

  • Page 55: Igmp Snooping Interface Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 60 – Layer2 Management > IGMP Snooping > Timer Configuration Parameter Description Router Port Purge To set the time-out period that an IGMP multicast router port hasn‟t received Interval (60~600 Secs) IGMP router control packet, it will be deleted.

  • Page 56: Igmp Snooping Vlan Router Ports

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots IGMP Snooping VLAN Router Ports This page is to display the static and dynamic learned IGMP router ports of each VLAN. Figure 62 – Layer2 Management > IGMP Snooping > Router Ports MAC Based Multicast Forwarding Table This page is to display the IGMP group MAC address was learned.

  • Page 57: Static Multicast Address Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Parameter Description Select Select which MAC address to apply the configuration changes. VLAN ID VLAN ID of this MAC address belongs to. MAC Address The MAC address. Allowed Port Specify the port allowed to forward the MAC address.

  • Page 58: Port Security Settings

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Port Security Settings This page is to configure the port security function for each port. Figure 66 – Layer2 Management > Static MAC Entries > Port Security Settings Parameter Description Select...

  • Page 59: Configuring Acl Functions

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 7 Configuring ACL Functions ACL Function List  MAC ACL Configuration  IP Standard ACL Configuration  IP Extended ACL Configuration  Classmap Settings  Policymap Settings MAC ACL Configuration This page is to create/configure a rule to MAC Access Control List.

  • Page 60: Ip Standard Acl Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots lavc-sca 0x6007(24583). mop-console 0x6002(24578). mop-dump 0x6001(24577). msdos 0x8041(32833). mumps 0x6009(24585). netbios 0x8040(32832). vines-echo 0x0BAF(2991). vines-ip 0x0BAD(2989). xns-id 0x0807(2055). others Insert a custom Ether type (0-65535) to the right column. Click Add to create a new ACL rule, Reset to clear the value.

  • Page 61: Ip Extended Acl Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 68 – ACL > IP Standard ACL Parameter Description ACL Number Specify the ACL ID of this rule. The possible ID of IP Standard ACL is 1-1000. Action Specify the action for packet matched.
  • Page 62 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 69 – ACL > IP Extended ACL Parameter Description ACL Number Specify the ACL ID of this rule. The possible ID of IP Standard ACL is 1001-65535.

  • Page 63: Classmap Settings

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Destination Port Mask Matching packet with a range of destination port. For example source port 23 with mask FFFE means 22~23. The mask options are: 8000, C000, E000, F000, F800, FC00, FE00, FF00, FF80, FFC0, FFE0, FFF0, FFF8, FFFC, FFFE, FFFF.

  • Page 64: Policymap Settings

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 70 – ACL > Classmap Parameter Description Classmap ID Specify the classmap ID. The possible value is 1-65535. ACL ID Specify the ACL rule ID to bind. ACL Type Specify the type of the ACL rule.
  • Page 65 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Policed-DSCP - Assign a new DSCP value to the packets. Policed-Priority - Assign a new 802.1p priority to the packets. In-Profile Action Value Specify the new value of above. When rewriting DSCP tag, the possible value is 0-63;...

  • Page 66: Configuring Qos Functions

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 8 Configuring QoS Functions QoS Function List  Rate Limiting  Storm Control Settings  802.1p Queue Mapping  802.1p Port Priority  DSCP Queue Mapping ...

  • Page 67: Storm Control Settings

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 72 – QoS > Rate Limiting Parameter Description Select Select a port to configure rate limiting function. Port Port ID. Ingress RateLimit Specify the traffic Kbit per second is allowed to be transmitted for an ingress (0,64~1000000 Kbps) port.

  • Page 68: P Port Priority

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 74 – QoS > 802.1p Parameter Description Priority 0~7 Specify which switch queue to map. The options are Class-0, Class-1, Class-2 and Class-3. Click Apply to submit the changes. 802.1p Port Priority This page is to configure the 802.1p priority for untagged packets receive from each port.

  • Page 69: Dscp Queue Mapping

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Parameter Description Select Select a port to submit the configuration changes. Port Port ID. User Priority Specify 802.1p priority of untagged packets. Click Apply to submit the changes. Click 1-12, 13-24, 25-28 to configure port priority for corresponding ports.
  • Page 70 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 77 – QoS > Egress Algorithm Parameter Description Scheduling Algorithm Select the algorithm of queue scheduling. The options are: Strict Priority - The traffic in highest queue always process first. Weighted RoundRobin - Using weighted round-robin algorithm to handle packets in priority queues.

  • Page 71: Configuring Rmon Functions

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 9 Configuring RMON Functions RMON Function List  RMON Basic Settings  RMON Statistics Configuration  RMON History Configuration  RMON Alarms Configuration  RMON Events Configuration RMON Basic Settings This page is to enable or disable RMON function Figure 78 –...

  • Page 72: Rmon History Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Click Add to create a new statistics entry, Reset to clear the value. Parameter Description Select Select a RMON statistics entry to apply the Index The index of the RMON statistics collection. Port The port of the RMON statistics collection.

  • Page 73: Rmon Alarms Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Interval Specify the time interval for the history collection. Owner Specify the owner of the history entry. Status Specify the status of this history entry. The options are: Valid - The history entry is valid.

  • Page 74: Rmon Events Configuration

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Interval The time interval in seconds that alarm monitors the MIB variable. Variable The MIB OID of this alarm entry. Sample type The type of the alarm sampling. The options are: Absolute value - To test the MIB variable directly.

  • Page 75: Chapter 10 Switch Statistics

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots SNMP Trap - Generating a trap message when event is triggered. Log and Trap - Generating both log and trap message when event is triggered. Community Specify the SNMP community string used for the traps.

  • Page 76: Ethernet Statistics

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 83 – Statistics > Interface Click 1-12, 13-24, 25-28 to display the Ethernet related statistics of corresponding ports. Ethernet Statistics This page is to display the Ethernet related statistics of each port. Figure 84 –...

  • Page 77: Mstp

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots MSTP MSTP Information This page is to display current MSTP settings and states of the Switch. Figure 86 – Statistics > MSTP > MSTP Information MSTP CIST Port Statistics This page is to display the MSTP traffic statistics of ports.

  • Page 78: Rstp

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots RSTP RSTP Information This page is to display current RSTP setting and states of the Switch. Figure 89 – Statistics > RSTP > RSTP Information RSTP Port Statistics This page is to display the RSTP traffic statistics of ports.

  • Page 79: La Neighbour Statistics Information

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 91 – Statistics > LA > Port LACP Stats Click 1-12, 13-24, 25-28 to display the Link Aggregation neighbours information of corresponding ports. LA Neighbour Statistics Information This page is to display the information of Link Aggregation neibubours.

  • Page 80: 802.1X Session Statistics

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Click 1-12, 13-24, 25-28 to display the Link Aggregation neighbours information of corresponding ports. 802.1X 802.1X Session Statistics This page is to display the statistics and status of current authenticated users. Figure 93 –...

  • Page 81: Igmp Snooping V1/V2 Statistics

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 95 – Statistics > IGMP Snooping > Clear Statistics Parameter Description All – Reset all IGMP Snooping traffic counters. Clear Vlan Counters VLAN ID – Reset the IGMP Snooping traffic counter of a VLAN. Vlan ID Choose a VLAN to reset the IGMP Snooping Counters.

  • Page 82: Rmon

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 98 – Statistics > IP > ICMP Statistics RMON This page is to display the RMON Statistics of the Switch. Figure 99 – Statistics > RMON Click First, Prev, Next, Last to see the first, previous, next or last page of the RMON Statistics.

  • Page 83: Snmp

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 100 – Statistics > MAC Address Table Parameter Description VLAN ID Display the MAC addresses under a given VLAN. MAC Address Display a specific MAC address in FDB. Port Display the MAC addresses learned under a given port.

  • Page 84: Chapter 11 Using The Command-Line Interface

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 11 Using the Command-Line Interface Accessing the Switch This system may be managed out-of-band through the console port on the front panel or in-band using Telnet. The user may also choose the web-based management, accessible through a web browser.

  • Page 85: Privilege Levels

    Privileged EXEC Mode admin admin Figure 103 –Connected to an end node via Ethernet cable Privilege Levels TL2-E284 support 15 user privilege levels for commands, the default setting as below. Privilege Levels 2~14 Description User EXEC Mode Not Defined...
  • Page 86 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots interface User EXEC Mode Interface Configuration Mode exit switch> switch(config-if)# enable vlan disable Config-vlan Mode exit switch(config-vlan)# Privileged EXEC Mode spanning-tree mst switch# configuration MSTP Configuration Mode configure exit exit...

  • Page 87: Conventions

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Configuration interfaces. Mode Config-vlan Mode The VLAN Configuration Mode is used to configure the commands for VLAN interfaces. MSTP The MSTP Configuration Mode is used to configure multiple spanning tree Configuration specific commands.

  • Page 88: Chapter 12 System Information Command

    A maximum of 15 characters is allowed. A NULL string is not accepted. Default Settings SysName Command Modes Global Configuration Mode User Guidelines This command defines the name of the Switch. switch(config)# system name trendnet Example Command History Version History 1.00.001 This command was introduced. 12-1...

  • Page 89: System Contact

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots system contact To enter identification information of a contact person. system contact <contact info> Command contact info Syntax Description A maximum of 50 characters is allowed. A NULL string is not accepted.

  • Page 90: System Cli-Timeout

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots system web-timeout <180-3600 seconds> Command 180-3600 seconds Syntax Description The web interface logs out the current user when no user activity input for 180-3600 seconds. Default Settings 600 seconds Command Modes Global Configuration Mode...

  • Page 91: Default Ip Address Allocation Protocol

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots default ip address <ip-address> [ subnet-mask <subnet mask> ] Command [ interface <interface-type> <interface-id> ] ip-address Syntax Description IP address of the default interface subnet-mask Subnet mask of the default interface subnet mask interface Interface-type including Fa (Fast Ethernet) or Gi (Gigabit...

  • Page 92: Default Mode

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Default mode must be dynamic to make this command effective. Note default mode To configure the mode that the IP address of default interface is assigned. default mode { manual | dynamic } Command manual...

  • Page 93: Default Restore-File

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command History Version History 1.00.001 This command was introduced. default restore-file To configure the default restoration file. default restore-file <filename> Command filename Syntax Description The name of restoration file. Default Settings Iss.conf Command Modes...

  • Page 94: Set Ip Http

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots set ip http To enable or disable HTTP server. set ip http {enable | disable} Command enable Syntax Description To enable the embedded HTTP server. disable To disable the embedded HTTP server.

  • Page 95: Show Nvram

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show system information Command Command Modes Privileged EXEC mode switch# show system information Example Hardware Version : Rev.A1 Firmware Version : 1.00.002 Switch Name : SysName System Contact : SysContact System Location...

  • Page 96: Show Http Server Status

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command History Version History 1.00.001 This command was introduced. show http server status To display the HTTP server status. show http server status Command Command Modes Privileged EXEC mode switch# show http server status Example...

  • Page 97: Show Line Console

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show line console To display the information of current session. show line console Command Command Modes Privileged EXEC mode switch# show line console Example Current Session Timeout (in secs) = 18000 Command History Version History...

  • Page 98: Chapter 13 User Account Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 13 User Account Command User Account Command List  username  show users  listuser username To configure a user account information username <user-name> [password <passwd>] [privilege <1-15>] Command no username <user-name>...
  • Page 99 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show users Example Line User Peer-Address 0 con root Local Peer Command History Version History 1.00.001 This command was introduced. listuser To display all existing user information. listuser Command Command Modes...

  • Page 100: Chapter 14 Management Vlan Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 14 Management VLAN Command Management VLAN Command List  management vlan-list  show management vlan management vlan-list To set the VLAN ID for the management VLAN. management vlan-list <vlan-list>...

  • Page 101: Chapter 15 Ip Settings Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 15 IP Settings Command IP Settings Command List  release dhcp vlanMgmt  renew dhcp vlanMgmt  ip arp max-retries   arp timeout  ip address ...

  • Page 102: Ip Arp Max-Retries

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots The IP address of Management VLAN interface must be assigned by a DHCP Note server. ip arp max-retries To set the maximum number of ARP request retries. ip arp max-retries <value (2-10)>...

  • Page 103: Arp Timeout

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command Modes Global Configuration Mode User Guidelines The no form is to remove the entry. switch(config)# arp 10.90.90.100 11:22:33:44:55 vlan 1 Example Command History Version History 1.00.001 This command was introduced.

  • Page 104: Ip Address Dhcp

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command Modes Interface Configuration Mode User Guidelines The no form will delete the configured IP address. switch(config-if)# ip address 20.0.0.1 255.0.0.0 20.0.0.254 Example Command History Version History 1.00.001 This command was introduced.

  • Page 105: Show Ip Interface

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch#debug ip dhcp client all Example Command History Version History 1.00.001 This command was introduced. show ip interface To display the IP interface information. show ip interface Command Command Modes Privileged EXEC mode...
  • Page 106 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch#show ip route summary Example Route Source Routes connected static ospf Total Command History Version History 1.00.001 This command was introduced. 15-6...

  • Page 107: Chapter 16 Ip Authorized Manager Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 16 IP Authorized Manager Command IP Authorized Manager Command List  authorized-manager  show authorized-managers authorized-manager To set an authorized administrator source IP address, and the services, interfaces, or VLANs that it is allowed to visit.

  • Page 108: Show Authorized - Managers

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots User Guidelines The no form removes the administrator from the list. switch(config)# authorized-manager ip-source 10.90.90.100 Example Command History Version History 1.00.001 This command was introduced. show authorized-managers Display the authorized-manager list.

  • Page 109: Chapter 17 Snmp Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 17 SNMP Command SNMP Command List  snmp access  snmp community  snmp engineid  snmp group  snmp trapinfo  snmp user  snmp view ...
  • Page 110 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots GroupName Syntax Description Name of SNMP group SNMP version 1 is to be used SNMP version 2v is to be used SNMP version 3 is to be used auth Authentication is required for the SNMP messages noauth...

  • Page 111: Snmp Community

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command Modes Global Configuration Mode User Guidelines Before configuring the access settings, the SNMP group has to be created first. switch(config)# snmp access oper v2c read operv2readview write Example operv2writeview notify operv2notifyview nonvolatile Command History...

  • Page 112: Snmp Group

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots snmp engineid <EngineIdentifier> Command no snmp engineid EngineIdentifier Syntax Description A string of between 5 and 32 octets expressed in hexadecimal that is separated by dots Default Settings 80.00.08.1c.04.46.53 Command Modes...
  • Page 113 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Default Settings Security Model : v1 Security Name : none Group Name : iso Storage Type : Non-volatile ------------------------------ Security Model : v1 Security Name : ReadOnly Group Name : ReadOnly Storage Type...

  • Page 114: Snmp Trapinfo

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots snmp trapinfo To configure the SNMP Trap setting of a community user, and no form deletes the setting. snmp trapinfo community-user <UserName> IPAddress {<IPAddress> Command | <IP6Address>} security-model {v1 | v2c | v3 {auth | noauth | authpriv}} [{volatile | nonvolatile}] no snmp trapinfo community-user <UserName>...

  • Page 115: Snmp View

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots passwd Authentication password priv DES passwd Encryption password volatile Store in volatile memory nonvolatile Store in nonvolatile memory Default Settings User : initial Authentication Protocol : None Privacy Protocol : None Storage Type...

  • Page 116: Snmp-Server Enable Traps Snmp Authentication

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots excluded Excludes the object from the list that the SNMP administrator can access volatile Store in volatile memory nonvolatile Store in nonvolatile memory Default Settings View Name : iso Subtree OID : 1 Subtree Mask : 1...

  • Page 117: Snmp-Server Enable Traps

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots snmp-server enable traps To enable specific SNMP trap message types, and no form disable them. snmp-server enable traps {firewall-limit | linkup | linkdown Command sip-states |sip-cfg-change coldstart poe-power dhcp-pool-limit | dsx1-line}...

  • Page 118: Snmp Trap Link-Status

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command History Version History 1.00.001 This command was introduced snmp trap link-status To enable sending link-status Trap message, and no form disables it snmp trap link-status Command no snmp trap link-status Default Settings...

  • Page 119: Show Snmp Community

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch#show snmp Example 0 SNMP Packets Input 0 Bad SNMP Version errors 0 Unknown community name 0 Get request PDUs 0 Get Next PDUs 0 Set request PDUs 0 SNMP Packets Output 0 Too big errors 0 No such name errors...

  • Page 120: Show Snmp Engineid

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show snmp community Example Community Index : NETMAN Community Name : NETMAN Security Name : none Context Name Transport Tag Storage Type : Non-volatile Row Status : Active ------------------------------ Community Index : PUBLIC...
  • Page 121 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command Modes Privileged EXEC Mode 17-13...
  • Page 122 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show snmp group Example Security Model : v1 Security Name : none Group Name : iso Storage Type : Non-volatile Row Status : Active ------------------------------ Security Model : v1 Security Name : ReadOnly Group Name...

  • Page 123: Show Snmp Group Access

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command History Version History 1.00.001 This command was introduced show snmp group access To display the access setting of SNMP group show snmp group access Command Command Modes Privileged EXEC Mode 17-15...
  • Page 124 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show snmp group access Example Group Name : iso Read View : iso Write View : iso Notify View : iso Storage Type : Non-volatile Row Status : Active ------------------------------...

  • Page 125: Show Snmp Inform Statistics

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Read View : ReadWrite Write View : ReadWrite Notify View : ReadWrite Storage Type : Non-volatile Row Status : Active ---------------------------- Command History Version History 1.00.001 This command was introduced show snmp inform statistics To display the recipient information of SNMP traps...

  • Page 126: Show Snmp User

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show snmp user To display the SNMP user information show snmp user Command Command Modes Privileged EXEC Mode switch# show snmp user Example Engine ID : 80.00.08.1c.04.46.53 User : initial Authentication Protocol : None...

  • Page 127: Show Snmp-Server Traps

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show snmp viewtree Command Command Modes Privileged EXEC Mode switch# show snmp viewtree Example View Name : iso Subtree OID : 1 Subtree Mask : 1 View Type : Included Storage Type : Non-volatile...

  • Page 128: Chapter 18 Ssh Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 18 SSH Command SSH Command List   ip ssh  debug ssh  show ip ssh To activate the SSH server function on the switch. The no format is to turn it off. ssh {enable | disable} Command enable...

  • Page 129: Debug Ssh

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots version Syntax Description The supported version of SSH. compatibility cipher To configure SSH Cipher algorithm. User can choose from ([des-cbc] DES (Data Encryption Standard) or 3DES (Triple_Data [3des-cbc]) Encryption Standard) encryption algorithm in CBC (Cipher Blocking Chain) mode.

  • Page 130: Show Ip Ssh

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Syntax Description Enable or disable all categories of messages. shut Shutdown messages. mgmt Management messages. data Data Path messages. ctrl Control panel messages. dump Packet Dump messages. resource All resource messages except for buffer.

  • Page 131: Ssl Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 19 SSL Command SSL Command List  ip http secure  debug ssl  show ssl server-cert  show ip http secure server status ip http secure To activate SSL server on the switch and configure Cipher and key settings.

  • Page 132: Debug Ssl

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Default Settings SSL server is disabled. Cipher Suite is RSA-DES-SHA1, RSA-3DES-SHA1, and RSA-EXP1024-DES-SHA1 Command Modes Global Configuration Mode switch(config)# ip http secure ciphersuite rsa-null-md5 Example Command History Version History 1.00.001...

  • Page 133: Show Ssl Server-Cert

    Certificate: Data: Version: 1 (0x0) Serial Number: 87:97:71:61:7f:72:c6:ae Signature Algorithm: sha1WithRSAEncryption Issuer: C=CA, L=Torrance, O=TRENDnet Validity Not Before: Aug 18 12:26:51 2009 GMT Not After : Aug 18 12:26:51 2011 GMT Subject: CN=TL2-E284 Subject Public Key Info: Public Key Algorithm: rsaEncryption...

  • Page 134: Show Ip Http Secure Server Status

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show ip http secure server status To display the SSL server status show ip http secure server status Command Command Modes Privileged EXEC Mode switch# show ip http secure server status Example HTTP secure server status : Disabled...

  • Page 135: Chapter 20 System Log Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 20 System Log Command System Log Command List  copy logs  logging  mailserver  clear logs  show logging  show email alerts copy logs Backup the system log to a remote tftp server copy logs tftp://ip-address/filename...

  • Page 136: Mailserver

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots ip-address Syntax Description IP address of the syslog server buffered size (1-200) The size of internal logging buffer console Enable logging to the console Facility local0~7 Specifies the facility that is indicated in the message.

  • Page 137: Clear Logs

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots ip-address Syntax Description The IP address of mail server Default Settings No mail server is configured. Command Modes Global Configuration Mode switch(config)# mailserver 172.17.0.201 Example Command History Version History 1.00.001...

  • Page 138: Show Email Alerts

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show logging Example System Log Information ---------------------- Syslog logging : enabled(Number of messages 0) Console logging : disabled(Number of messages 0) TimeStamp option : enabled Trap logging : Informational Log server IP...

  • Page 139: Chapter 21 Sntp Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 21 SNTP Command SNTP Command List  clock set  set sntp  set sntp dst  sntp dst  sntp poll-interval  sntp primary-ip ...

  • Page 140: Set Sntp Dst

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots enable Syntax Description Enables the SNTP. disable Disables the SNTP. Default Settings Disable Command Modes Global Configuration Mode switch(config)# set sntp enable Example Command History Version History 1.00.001 This command was introduced...

  • Page 141: Sntp Poll-Interval

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots from Syntax Description Time that DST startis from january ~ december Specify the month that DST starts. day (1-31) Specify the day that DST starts. hour (0-23) Specify the hour that DST starts.

  • Page 142: Sntp Secondary-Ip

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots sntp primary-ip <ip-address> Command ip-address Syntax Description Specify the IP address of the primary SNTP server. Command Modes Global Configuration Mode switch(config)# sntp primary-ip 172.17.5.254 Example Command History Version History...

  • Page 143: Show Clock

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch(config)# sntp timezone offset – 8 0 Example Command History Version History 1.00.001 This command was introduced show clock To display the system date and time. show clock Command Command Modes...

  • Page 144: Chapter 22 Configuration Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 22 Configuration Command Configuration Command List  write  copy startup-config  copy  erase write To save the running configuration. write flash:filename startup-config Command tftp://ip-address/filename } flash:filename Syntax Description...
  • Page 145 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# copy startup-config flash:backupstarup Example Command History Version History 1.00.001 This command was introduced copy To replace the startup configuration by a another configuration file in remote TFTP site or NV-RAM.

  • Page 146: Chapter 23 Firmware Upgrade Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 23 Firmware Upgrade Command Firmware Upgrade Command List  archive download-sw /overwrite archive download-sw /overwrite To download the image from a TFTP server. archive download-sw /overwrite tftp://ip-address/filename Command tftp://ip-address Syntax Description...

  • Page 147: Chapter 24 Reboot Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 24 Reboot Command Reboot Command List  reload reload Reboot the Switch reload Command Command Modes Privileged EXEC Mode switch# reload Example Command History Version History 1.00.001 This command was introduced...

  • Page 148: Chapter 25 Port Manager Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 25 Port Manager Command Port Manager Command List  monitor session  negotiation  speed  duplex  flowcontrol   show flow-control  show mdi-mdix ...

  • Page 149: Negotiation

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command Modes Global Configuration Mode User Guidelines 1. Using no form to disable the port mirroring function. 2. Destination port and source port have to be counfigured separately. 3.

  • Page 150: Duplex

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots User Guidelines The configured port speed and duplex settings only takes effect when auto-negotiation disabled. switch(config-if)# speed 100 Example Command History Version History 1.00.001 This command was introduced duplex To set the port duplex mode.

  • Page 151: Mdi

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command History Version History 1.00.001 This command was introduced To set MDI or MDIX mode for ports. mdi { auto | mdi | mdix } Command auto Syntax Description Port performs the auto MDI/MDIX function.

  • Page 152: Show Mdi-Mdix

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show mdi-mdix To display the MDI/MDIX setting on ports. show mdi-mdix [ interface <interface-type> <interface-id>] Command interface Syntax Description Specify which interface to show MDI/MDIX setting interface-type Interface-type including Fa (Fast Ethernet) or Gi (Gigabit interface-id...
  • Page 153 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show port-monitoring Command Command Modes Privileged EXEC Mode switch# show port-monitoring Example Port Monitoring is enabled Monitor Port : Fa0/9 Port Ingress-Monitoring Egress-Monitoring ---- ------------------ ----------------- Fa0/1 Enabled Enabled...

  • Page 154: Chapter 26 Vlan Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 26 VLAN Command VLAN Command List  vlan  switchport acceptable-frame-type  switchport ingress-filter  switchport pvid  ports  debug vlan  show vlan ...

  • Page 155: Switchport Ingress-Filter

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Syntax Description Accepts all kinds of frames. tagged Accepts only tagged frames untaggedAndPrioritytagged Accepts only untagged frames and frames with priority tag. Default Settings Command Modes Interface Configuration Mode switch(config-if)# switchport acceptable-frame-type tagged Example...

  • Page 156: Ports

    The default port membership is tagged. Command Modes Config-vlan Mode User Guidelines The untagged port must be the subset of member port. switch(config-vlan)# ports fa 0/1-5 untagged fa 0/5 forbidden Example fa 0/7 name trendnet Command History Version History 1.00.001 This command was introduced 26-3...

  • Page 157: Debug Vlan

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots debug vlan To enable the debug mode for VLAN. debug vlan { global | [{fwd | priority | redundancy} [initshut] Command [mgmt] [data] [ctpl] [dump] [os] [failall] [buffer] [all]]} no debug vlan { global | [{fwd | priority | redundancy} [initshut] [mgmt] [data] [ctpl] [dump] [os] [failall] [buffer] [all]]}...
  • Page 158 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show vlan [brief | id <vlan-range> | summary] Command brief Syntax Description Display the brief of VLAN information. id <vlan-range> Limited a range of VLAN to display the information. The vlan-range format is a-b, b should be larger than a.
  • Page 159 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Single Instance: Example switch# show vlan brief Vlan database ------------- Vlan ID Member Ports : Fa0/1, Fa0/2, Fa0/3, Fa0/4, Fa0/5, Fa0/6 Fa0/7, Fa0/8, Fa0/9, Fa0/10, Fa0/11, Fa0/12 Fa0/13, Fa0/14, Fa0/15, Fa0/16, Fa0/17, Fa0/18, Fa0/19, Fa0/20, Fa0/21, Fa0/22, Fa0/23, Fa0/24...

  • Page 160: Show Vlan Device Info

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Name : Status : Dynamic Gvrp ---------------------------------------------------- Command History Version History 1.00.001 This command was introduced show vlan device info To display the VLAN settings and detailed information of the device. show vlan device info Command Command Modes...

  • Page 161: Show Vlan Port Config

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Single Instance: Example switch# show vlan device info Vlan device configurations -------------------------- Vlan Status : Enabled Vlan Oper status : Enabled Gvrp status : Disabled Gvrp Oper status : Disabled Bridge Mode : Customer Bridge...
  • Page 162 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command Modes Privileged EXEC Mode User Guidelines System will display VLAN configurations for all port when executing the command without a port parameter. 26-9...
  • Page 163 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Single Instance: Example switch# show vlan port config port fa 0/1 Vlan Port configuration table ------------------------------- Port Fa0/1 Port Vlan ID Port Acceptable Frame Type : Admit All Port Ingress Filtering : Enabled Port Mode...
  • Page 164 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Default Priority : 0 ------------------------------------------------------- Port Fa0/3 Port Vlan ID : 1 Port Acceptable Frame Type : Admit All Port Ingress Filtering : Disabled Port Mode : Hybrid Port Gvrp Status : Enabled Port Gmrp Status : Enabled Port Gvrp Failed Registrations : 0...

  • Page 165: Chapter 27 Dynamic Vlan Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 27 Dynamic VLAN Command Dynamic VLAN Command List  set gvrp  set port gvrp  set garp timer  vlan restricted  shutdown garp ...

  • Page 166: Set Garp Timer

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots interface-type Syntax Description Specify which port to enable GVRP function. interface-id Interface-type including Fa (Fast Ethernet) or Gi (Gigabit Ethernet). Interface-id is slot/port number. enable Enables GVRP on the port. disable Disables GVRP on the port.

  • Page 167: Vlan Restricted

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots vlan restricted To enable/disable the restricted VLAN on an interface. vlan restricted {enable | disable} Command enable Syntax Description Enalbes VLAN restriction. disable Disables VLAN restriction. Default Settings Disable Command Modes...

  • Page 168: Debug Garp

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots debug garp To enable the debug mode of GARP function. debug garp { global | [{protocol | gvrp | redundancy} [initshut] Command [mgmt] [data] [ctpl] [dump] [os] [failall] [buffer] [all]]} no debug garp { global | [{protocol | garp | redundancy} [initshut] [mgmt] [data] [ctpl] [dump] [os] [failall] [buffer] [all]]...
  • Page 169 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots port Syntax Description Specify which port to show GVRP timer setting. interface-type Interface-type including Fa (Fast Ethernet) or Gi (Gigabit interface-id Ethernet). Interface-id is slot/port number. Command Modes Privileged EXEC Mode User Guidelines...

  • Page 170: Chapter 28 Rstp Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 28 RSTP Command RSTP Command List  spanning-tree  spanning-tree compatibility  spanning-tree mode  spanning-tree pathcost dynamic  spanning-tree transmit hold-count  spanning-tree timers ...

  • Page 171: Spanning-Tree Mode

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots spanning-tree compatibility {stp|rst|mst} Command no spanning-tree compatibility Syntax Description Compatible wirh STP. Compatible with RSTP. Compatible with MSTP. Default Settings Command Modes Global Configuration Mode User Guidelines Using no form to reset the STP compatibility to default.

  • Page 172: Spanning-Tree Pathcost Dynamic

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots spanning-tree pathcost dynamic To enable the dynamic pathcost according to the port speed.. spanning-tree pathcost dynamic Command no spanning-tree pathcost dynamic Default Settings Disable Command Modes Global Configuration Mode User Guidelines 1.

  • Page 173: Spanning-Tree Timers

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots spanning-tree timers To set the timer of spanning tree. spanning-tree {forward-time <seconds(4-30)> hello-time Command <seconds(1-2)> | max-age <seconds(6-40)>} no spanning-tree { forward-time | hello-time | max-age } forward-time Syntax Description The time period that a port changes the STP state from...

  • Page 174: Spanning-Tree Restricted-Role

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command History Version History 1.00.001 This command was introduced spanning-tree restricted-role To enable the root guard function to prevent the port becoming a root port. spanning-tree restricted-role Command no spanning-tree restricted-role Default Settings...

  • Page 175: Spanning-Tree Interface Attributes

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots spanning-tree interface attributes To set detailed spanning attrebutes to ports. spanning-tree {cost <value(0-200000000)> | disable | link-type Command {point-to-point shared} portfast port-priority <value(0-240)>} no spanning-tree {cost | disable | link-type | portfast | port-priority} cost Syntax Description...

  • Page 176: Clear Spanning-Tree Counters

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch(config)# shutdown spanning-tree Example Command History Version History 1.00.001 This command was introduced clear spanning-tree counters To clear the spanning tree counters. clear spanning-tree counters Command Command Modes Global Configuration Mode switch(config)# clear spanning-tree counters...
  • Page 177 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots global Syntax Description Displays the MSTP global debug messages. Displays all RSTP/MSTP debug messages. errors Displays the error code debug messages. init-shut Displays the initial and shutdown debug messages. management Displays the management related debug messages.

  • Page 178: Show Spanning-Tree

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show spanning-tree To display the spanning port states, statistics, settings and detailed information. show spanning-tree [{ summary | blockedports | pathcost Command method }] summary Syntax Description Display the summary of port states.
  • Page 179 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Single Instance: Example switch# show spanning-tree Root Id Priority 32768 Address 00:18:8b:bf:75:30 Cost 0 Port 0 [0] This bridge is the root Max age 20 Sec, forward delay 15 Sec Spanning tree Protocol Enabled Bridge Id Priority 32768...
  • Page 180 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots S-VLAN Component: MST00 is executing the mstp compatible Multiple Spanning Tree Protocol Bridge Id Priority 32768 Address 00:18:8b:bf:75:30 Hello Time 2 sec, Max Age 20 sec, Forward Delay 15 sec Dynamic Path Cost is Enabled Name...

  • Page 181: Show Spanning-Tree Active

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show spanning-tree active To display the spanning tree information on active ports. show spanning-tree active [detail] Command detail Syntax Description Display the details of spanning tree bridge. Command Modes Privileged EXEC Mode 28-12...
  • Page 182 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Single Instance: Example switch# show spanning-tree active Root Id Priority 8192 Address 00:74:24:00:01:00 Cost 2000000 Port Fa0/1 Hello Time 2 Sec, Max Age 20 Sec, Forward Delay 15 Sec Spanning Tree Enabled Protocol RSTP Bridge Id Priority 32768...

  • Page 183: Show Spanning-Tree Bridge

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show spanning-tree bridge To display the spanning tree bridge settings. show spanning-tree bridge [{ address | forward-time | hello-time Command | id |max-age | protocol | priority | detail }] address Syntax Description Display the MAC address of spanning tree bridge.
  • Page 184 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Single Instance: Example switch# show spanning-tree bridge Bridge ID HelloTime MaxAge FwdDly Protocol --------- --------- ------ ------ -------- 80:00:00:74:24:00:01:00 2000 rstp switch# show spanning-tree bridge address Bridge Address is 00:74:24:00:01:00 switch# show spanning-tree bridge forward-time Bridge Forward delay is 15 sec...

  • Page 185: Show Spanning-Tree Interface

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots MST00 00:74:24:00:01:00 Switch - cust1 MST00 00:74:24:00:01:02 Command History Version History 1.00.001 This command was introduced show spanning-tree interface To display the spanning tree states, statistics, settings information on a port. show spanning-tree interface <interface-type>...
  • Page 186 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Single Instance: Example switch# show spanning-tree interface fa 0/1 Role State Cost Prio Type ---- ----- ---- ---- ---- Root Forwarding 2000000 128 SharedLan switch# show spanning-tree interface fa 0/1 cost Port cost is 2000000 switch# show spanning-tree interface fa 0/1 priority Port Priority is 128...
  • Page 187 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots BPDUs : sent 1479 , recieved 3458 Multiple Instance: switch# show spanning-tree interface fa 0/1 Switch - default Role State Cost Prio Type ---- ----- ---- ---- ---- Root Forwarding 2000000 128...

  • Page 188: Show Spanning-Tree Root

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show spanning-tree interface fa 0/1 detail Switch – default Port 1 [Fa0/1] is Root , Forwarding Port PathCost 2000000, Port Priority 128, Port Identifier 128.1 Designated Root has priority 8192, address 00:18:8b:bf:75:30 Designated Bridge has priority 8192, address 00:18:8b:bf:75:30 Designated Port Id is 128.1, Designated PathCost 0...
  • Page 189 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show spanning-tree root Example Root ID RootCost MaxAge FwdDly RootPort ------- --------------- ------ -------- 80:00:08:00:1f:3f:73:26 0 switch# show spanning-tree root address Root Bridge Address is 08:00:1f:3f:73:26 switch# show spanning-tree root cost Root Cost is 2000000 switch# show spanning-tree root forward-time...

  • Page 190: Chapter 29 Mstp Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 29 MSTP Command MSTP Command List  spanning-tree priority  spanning-tree mst configuration  spanning-tree mst max-hops  spanning-tree mst max-instance  instance  name ...

  • Page 191: Spanning-Tree Mst Max-Hops

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots spanning-tree mst configuration Command Command Modes Global Configuration Mode User Guidelines Spanning tree mode must be MST before entering the MSTP Configuration Mode. switch(config)# spanning-tree mst configuration Example switch(config-mst)# Command History...

  • Page 192: Instance

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Default Settings Command Modes Global Configuration Mode User Guidelines Using no form to reset the max instance number to default. switch(config)# spanning-tree mst max-instance 16 Example Command History Version History...

  • Page 193: Revision

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Default Settings 00: 00: 00: 00: 00: 00 Command Modes MSTP Configuration Mode User Guidelines Using no form the reset the name to default. switch(config-mst)# name trendnet Example Command History Version History 1.00.001 This command was introduced revision To set the revision number for the MST reigon.

  • Page 194: Show Spanning-Tree Mst

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command Modes Interface Configuration Mode User Guidelines Use no form to reset the hello time value to default. switch(config-if)# spanning-tree mst hello-time 1 Example Command History Version History 1.00.001...

  • Page 195: Show Spanning-Tree Mst Interface

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command History Version History 1.00.001 This command was introduced show spanning-tree mst interface To display the MSTP status, statistics and current setting on interfaces. show spanning-tree [<instance-id(1-64)>] interface Command...

  • Page 196: Show Spanning-Tree Mst Configuration

    To display current multiple spanning tree settings. show spanning-tree mst configuration Command Command Modes Privileged EXEC Mode Single Instance: Example switch# show spanning-tree mst configuration Name [trendnet] Revision 2 Instance Vlans mapped -------- ------------------------------------------ 1,3-1024,1025-2048,2049-3072,3073-4094 ------------------------------------------------------- Multiple Instance: switch# show spanning-tree mst configuration...

  • Page 197: Chapter 30 Link Aggregation Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 30 Link Aggregation Command Link Aggregation Command List  set port-channel  lacp system-priority  port-channel load-balance  channel-group  lacp port-priority  lacp timeout ...

  • Page 198: Port-Channel Load-Balance

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots 0-65535 Syntax Description Specify the value of LACP system priority. Default Settings 32768 Command Modes Global Configuration Mode User Guidelines The system priority decides the standby or active links in a aggregation when the number of member port exceeds the maximum number of the etherchannel that Switch supported.

  • Page 199: Channel-Group

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command History Version History 1.00.001 This command was introduced channel-group To join a port to a channel group. channel-group <channel-group-number(1-65535)> mode {active | Command passive | on} no channel-group channel-group-n Syntax Description...

  • Page 200: Lacp Timeout

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots User Guidelines The port priority decides the standby or active links in a aggregation when the number of member port exceeds the maximum number of the etherchannel that Switch supported.

  • Page 201: Shutdown Port-Channel

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch(config-if)# lacp wait-time 0 Example Command History Version History 1.00.001 This command was introduced shutdown port-channel To shutdown the port channel group. shutdown port-channel Command no shutdown port-channel Default Settings Active Command Modes...
  • Page 202 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots User Guidelines System will display the global information and the summary of all port channel groups when executing this command without any keyword. 30-6...
  • Page 203 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show etherchannel Example Port-channel Module Admin Status is enabled Port-channel Module Oper Status is enabled Port-channel System Identifier is 00:74:24:00:01:00 Maximum ports per Port Channel is 8 with maximum 8 active ports Channel Group Listing --------------------- Group : 1...
  • Page 204 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Default Port = None switch# show etherchannel 1 load-balance Channel Group Listing --------------------- Group : 1 ---------- Source & Destination MAC Address switch# show etherchannel 1 port Channel Group Listing --------------------- Group: 1...

  • Page 205: Show Lacp

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Number of Ports = 1 HotStandBy port = null Port state = Port-channel Ag-Not-Inuse Protocol = LACP MAC selection = Dynamic Default Port = None switch# show etherchannel 1 summary Port-channel Module Admin Status is enabled Port-channel Module Oper Status is enabled Port-channel System Identifier is 00:74:24:00:01:00...

  • Page 206: Show Interfaces Etherchannel

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command Modes Privileged EXEC Mode switch# show lacp 1 counters Example LACPDUs LACPDUs Port Sent Recv Pkts Err ------------------------------------------------ Channel group: 1 ------------------ Gi0/1 788 704 Gi0/2 636 596 switch# show lacp 1 neighbor...
  • Page 207 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show interfaces [<interface-type> <interface-id> Command etherchannel interface-type Syntax Description Specify the information of which port to show. interface-id Interface-type including Fa (Fast Ethernet) or Gi (Gigabit Ethernet).
  • Page 208 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show interface gi 0/1 etherchannel Example Port : Gi0/1 ------------- Port State = Down, Not in Bundle Channel Group : 1 Mode : Active Pseudo port-channel = Po1 LACP port-priority = 128 LACP Wait-time = 2 secs LACP Admin Port = 25...

  • Page 209: 802.1X Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 31 802.1X Command 802.1X Command List  dot1x re-authenticate  dot1x system-auth-control  aaa authentication dot1x default  dot1x local-database  radius-server host  dot1x control-direction ...
  • Page 210 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots dot1x system-auth-control To enable 802.1X authentication on the Switch. dot1x system-auth-control Command no dot1x system-auth-control Default Settings Disable Command Modes Global Configuration Mode User Guidelines Using no form to disable the 802.1X authentication. switch(config)# dot1x system-auth-control Example Command History...
  • Page 211 1. When the timeout vlaue is 0, the authenticator will use the re-authentication period of the authenticator port 2. When create a user account without permission, auth-timeout and interface values, system will assign default value to this account. switch(config)# dot1x local-database trendnet password Example trendnet123 permission deny Command History Version History 1.00.001...
  • Page 212 – 3 times Command Modes Global Configuration Mode User Guidelines When configure a RADIUS server without timeout and retransmit parameter, system will apply the default values. switch(config)# radius-server host 172.17.5.111 key trendnet Example Command History Version History 1.00.001 This command was introduced dot1x control-direction To choose the authentication control direction on ports.

  • Page 213: Dot1X Default

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots dot1x default To configure 802.1X with default values on the port. dot1x default Command Default Settings Per-interface 802.1X protocol enable state - Enabled (force-authorized) Periodic reauthentication Disabled Number of seconds between reauthentication attempts...

  • Page 214: Dot1X Max-Start

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots User Guidelines Using no form to reset the number of retry to default. switch(config-if)# dot1x max-req 10 Example Command History Version History 1.00.001 This command was introduced dot1x max-start To set the maximum EAPOL retries of the authenticator.

  • Page 215: Dot1X Reauthenitcation

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Default Settings Force-authorized Command Modes Interface Configuration Mode switch(config-if)# dot1x port-control auto Example Command History Version History 1.00.001 This command was introduced dot1x reauthenitcation To enable the periodic re-authentication on ports. dot1x reauthenitcation Command no dot1x reauthenitcation...

  • Page 216: Shutdown Dot

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots quiet-period Syntax Description The period that Switch will not do anything after a failed value (0-65535) authentication. reauth-period The period between re-authentication attempts. value (1-65535) server-timeout The period that Switch waits for the re-transmission to the value (1-65535) RADIUS server.

  • Page 217: Debug Dot

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots debug dot1x To enable the debug mode of 802.1X authentication. debug dot1x {all | errors | events | packets | state-machine Command | redundancy} no debug dot1x {all | errors | events | packets | state-machine | redundancy} Syntax Description Displays all 802.1X debug messages.

  • Page 218: Show Dot

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Syntax Description Displays all RADIUS debug messages. errors Displays the error code debug messages. events Displays the event related debug messages. packets Displays the packet related debug messages. responses Displays the server response related debug messages.
  • Page 219 = 00:00:00:00:00:00 switch# show dot1x local-database Pnac Authentication Users Database ----------------------------------- User name : trendnet Protocol : 4 Timeout : 0 seconds Ports : Fa0/1, Fa0/2, Fa0/3, Fa 0/4, Fa 0/5, Fa 0/6, Fa 0/7, Fa 0/8, Fa 0/9, Fa 0/10, Fa 0/11, Fa 0/12, Fa 0/13, Fa 0/14,...

  • Page 220: Show Radius Server

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Fa 0/22, Fa 0/23, Fa 0/24 Permission : Allow --------------------------------- Command History Version History 1.00.001 This command was introduced show radius server To display current status and settings of RADIUS servers show radius server Command Command Modes...
  • Page 221 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show radius statistics Example Radius Server Statistics ------------------------- Index : 1 Radius Server Address : 172.17.5.135 UDP port number : 1812 Round trip time : 0 No of request packets : 7 No of retransmitted packets : 72 No of access-accept packets : 0...

  • Page 222: Chapter 32 Igmp Snooping Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 32 IGMP Snooping Command IGMP Command List  ip igmp snooping  ip igmp snooping clear counters  ip igmp snooping group-query-interval  ip igmp snooping mrouter ...

  • Page 223: Ip Igmp Snooping Clear Counters

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots ip igmp snooping clear counters To clear the IGMP snooping. counters ip igmp snooping clear counters [Vlan <vlanid (1-4094)>] Command Vlan vlanid Syntax Description Specify the counters of which VLAN to clear. (1-4094) Command Modes Global Configuration Mode...

  • Page 224: Ip Igmp Snooping Mrouter-Time-Out

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots ip igmp snooping mrouter <interface-type> <0/a-b, 0/c, ...> Command no ip igmp snooping mrouter <interface-type> <0/a-b, 0/c, ...> interface-type Syntax Description Specify the type and ID of the static multicast router port. 0/a-b, 0/c, ...

  • Page 225: Ip Igmp Snooping Querier-Query-Interval

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots ip igmp snooping port-purge-interval <(130 - 1225) seconds> Command no ip igmp snooping port-purge-interval (130-1225) Syntax Description Specify the port purge interval. seconds Default Settings 260 seconds Command Modes Global Configuration Mode User Guidelines...

  • Page 226: Ip Igmp Snooping Report-Suppression-Interval

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots ip igmp snooping report-forward {all-ports | router-ports} Command no ip igmp snooping report-forward all-ports Syntax Description To forward IGMP reports to all ports. router-ports To forward IGMP reports to router ports. Default Settings Router ports Command Modes...

  • Page 227: Ip Igmp Snooping Send-Query

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots received a IGMPv2 leave message. ip igmp snooping retry-count <1 - 5> Command no ip igmp snooping retry-count 1 - 5 Syntax Description Specify the maximum retries for group specific queries. Default Settings Command Modes Global Configuration Mode...

  • Page 228: Ip Igmp Snooping Querier

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots ip igmp snooping fast-leave Command no ip igmp snooping fast-leave Default Settings Disable Command Modes Config-vlan Mode switch(config-vlan)# ip igmp snooping fast-leave Example Command History Version History 1.00.001 This command was introduced...

  • Page 229: Debug Ip Igmp Snooping

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots User Guidelines Using no form the restart the snooping. switch(config)# shutdown snooping Example Command History Version History 1.00.001 This command was introduced debug ip igmp snooping To enable the debug mode of IGMP snooping.

  • Page 230: Show Ip Igmp Snooping

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command History Version History 1.00.001 This command was introduced show ip igmp snooping To display current settings of IGMP snooping function. show ip igmp snooping [Vlan <vlan id>] Command Vlan vlan id Syntax Description...

  • Page 231: Show Ip Igmp Snooping Globals

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command History Version History 1.00.001 This command was introduced show ip igmp snooping globals To display the current global settings of IGMP snooping function. show ip igmp snooping globals Command Command Modes Privileged EXEC Mode...

  • Page 232: Show Ip Igmp Snooping Mrouter

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# sh ip igmp snooping groups vlan 1 Group 239.255.255.250 Example Snooping Group information ----------------------------- Index: 1 Index: 2 Index: 3 VLAN ID:1 Group Address: 239.255.255.250 Filter Mode: EXCLUDE Exclude sources: None Receiver Ports:...

  • Page 233: Show Ip Igmp Snooping Statistics

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Single Instance: Example switch# show ip igmp snooping mrouter Vlan Ports ----- ------ 1 Gi0/1(dynamic), Gi0/2(static) 2 Gi0/3(static), Gi0/4(dynamic) Multiple Instance: switch# show ip igmp snooping mrouter Switch cust1 Vlan Ports ----- ------...
  • Page 234 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show ip igmp snooping statistics vlan 1 Example Snooping Statistics for VLAN 1 General queries received : 0 Group specific queries received : 0 Group and source specific queries received : 0 ASM reports received : 477 SSM reports received : 0 IS_INCLUDE messages received : 0...

  • Page 235: Chapter 33 Static Mac Entries Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 33 Static MAC Entries Command Static MAC Entries Command List  mac-address-table aging-time  mac-address-table static multicast  mac-address-table static unicast  show mac-address-table  show mac-address-table aging-time ...
  • Page 236 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots mac-address-table static multicast <aa:aa:aa:aa:aa:aa> vlan Command <vlan-id(1-4094)> [recv-port <interface-type> <interface-id>] interface ([<interface-type> <0/a-b,0/c,...>] [<interface-type> <0/a-b,0/c,...>] [port-channel <a,b,c-d>]]) [forbidden-ports ([<interface-type> <0/a-b,0/c,...>] [<interface-type> <0/a-b,0/c,...>] [port-channel <a,b,c-d>]]) [status { permanent | deleteOnReset | deleteOnTimeout }] no mac-address-table static multicast <aa:aa:aa:aa:aa:aa>...

  • Page 237: Mac-Address-Table Static Unicast

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots mac-address-table static unicast To create a static unicast entry in L2 FBD. mac-address-table static unicast <aa:aa:aa:aa:aa:aa> vlan Command <vlan-id(1-4094)> [recv-port <interface-type> <interface-id>] interface ([<interface-type> <0/a-b,0/c,...>] [<interface-type> <0/a-b,0/c,...>] [port-channel <a,b,c-d>]) [status { permanent | deleteOnReset | deleteOnTimeout }] no mac-address-table static unicast <aa:aa:aa:aa:aa:aa>...
  • Page 238 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show mac-address-table To display the MAC address data learned or configured in MAC address table. show mac-address-table [vlan <vlan-range>] [address Command <aa:aa:aa:aa:aa:aa>] [{interface <interface-type> <interface-id>}] vlan vlan-range Syntax Description To display MAC addresses belong to a specific VLAN range.

  • Page 239: Show Mac-Address-Table Aging-Time

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show mac-address-table aging-time Command Command Modes Privileged EXEC Mode switch# show mac-address-table aging-time Example Mac Address Aging Time: 300 Command History Version History 1.00.001 This command was introduced show mac-address-table count To display the statistics for each kind of MAC address in MAC address table.

  • Page 240: Show Mac-Address-Table Dynamic Unicast

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots vlan vlan-range Syntax Description To display MAC addresses belong to a specific VLAN range. address Specify a specific MAC address to display. aa:aa:aa:aa:aa:aa interface To display MAC addresses under a specific port. interface-type Interface-type including Fa (Fast Ethernet), Gi (Gigabit interface-id...

  • Page 241: Show Mac-Address-Table Static Multicast

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show mac-address-table dynamic unicast vlan 1 Example Vlan Mac Address Type Ports ---- ----------- ---- ----- 00:18:8b:bf:75:30 Learnt Fa0/3 00:19:cb:d2:f2:75 Learnt Fa0/11 00:22:15:0c:85:6c Learnt Fa0/11 Total Mac Addresses displayed: 3 Command History Version...

  • Page 242: Show Mac-Address-Table Static Unicast

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command History Version History 1.00.001 This command was introduced show mac-address-table static unicast To display the static unicast MAC address in MAC address table. show mac-address-table static unicast [vlan <vlan-range>] Command [address <aa:aa:aa:aa:aa:aa>] [{interface <interface-type>...

  • Page 243: Chapter 34 Port Security Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 34 Port Security Command Port Security Command List  max learning address  show max-learning-address max learning address To limits the number of MAC address learned from a port. max learning address <address number(0-64)>...
  • Page 244 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show max-learning-address Example Port Port Security Status Max Learning Address ---- ------------------ ----------------- Fa0/1 Enabled Fa0/2 Disabled Fa0/3 Enabled Fa0/4 Disabled Fa0/5 Enabled Fa0/6 Disabled Fa0/7 Enabled Fa0/8...

  • Page 245: Chapter 35 Acl Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 35 ACL Command ACL Command List  mac access-list extended  ip access-list  deny (MAC Access List Configuration)  permit (MAC Access List Configuration) ...

  • Page 246: Deny (Mac Access List Configuration)

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots ip access-list { standard <access-list-number (1-1000)> | Command extended <access-list-number (1001-65535)> } no ip access-list { standard <access-list-number (1-1000)> | extended <access-list-number (1001-65535)> } standard Syntax Description Specify the ID to a standard IP access control list.
  • Page 247 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Syntax Description Matching packets with any source MAC address. host Matching packets with a specific source MAC address. mac-address Matching packets with any destination MAC address. host Matching packets with a specific destination MAC address.

  • Page 248: Permit (Mac Access List Configuration)

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots permit (MAC Access List Configuration) To configure a rule that packets matched will be processed. permit { any | host <mac-address>}{ any | host <mac-address> } Command [aarp | amber | dec-spanning | decnet-iv | diagnostic | dsm | etype-6000 | etype-8042 | lat | lavc-sca | mop-console | mop-dump...

  • Page 249: Deny (Standard Ip Access List Configuration)

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command Modes MAC Access List Configuration Mode switch(config-ext-macl)# permit host 11-22-33-44-55-66 any Example msdos Command History Version History 1.00.001 This command was introduced deny (Standard IP Access List Configuration) To configure a rule that packets matched will be filtered.

  • Page 250: Deny (Extended Ip Access List Configuration)

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Syntax Description Matching packet with any source IP address. host Matching packet with a specific source IP address. src-ip-address src-ip-address Matching packet with a range of source IP address. For mask example 172.17.5.1 with mask 255.255.255.0 means 172.15.5.0~255.
  • Page 251 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Syntax Description Matching all IP packets. ospf Matching all OSPF packets. Matching all PIM packets. protocol-type Matching packets with specific protocol type. (1-255) Matching packet with any source IP address. host Matching packet with a specific source IP address.

  • Page 252: Permit (Extended Ip Access List Configuration)

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots permit (Extended IP Access List Configuration) To configure a rule that packets matched will be processed. permit { ip | ospf | pim | <protocol-type (1-255)>} { any | host Command <src-ip-address>...
  • Page 253 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Syntax Description Matching all IP packets. ospf Matching all OSPF packets. Matching all PIM packets. protocol-type Matching packets with specific protocol type. (1-255) Matching packet with any source IP address. host Matching packet with a specific source IP address.

  • Page 254: Deny Icmp (Extended Ip Access List Configuration)

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots deny icmp (Extended IP Access List Configuration) To configure a rule that packets matched will be filtered. deny icmp {any |host <src-ip-address>|<src-ip-address> <mask>} Command {any | host <dest-ip-address> | <dest-ip-address> <mask> } {message-type <(0-255)>} {message-code <(0-255)>} Syntax Description Matching packet with any source IP address.

  • Page 255: Mac Access-Group

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Syntax Description Matching packet with any source IP address. host Matching packet with a specific source IP address. src-ip-address src-ip-address Matching packet with a range of source IP address. For mask example 172.17.5.1 with mask 255.255.255.0 means 172.15.5.0~255.

  • Page 256: Ip Access-Group

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots ip access-group To apply an IP access control list from the port. ip access-group <access-list-number (1-65535)> Command no ip access-group [<access-list-number (1-65535)>] access-list-number Syntax Description (1-65535) Command Modes Interface Configuration Mode User Guidelines...
  • Page 257 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command History Version History 1.00.001 This command was introduced 35-13...

  • Page 258: Chapter 36 Classmap Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 36 Classmap Command Classmap Command List  class-map  match access-group  show class-map class-map To create or enter a class map. class-map <class-map-number(1-65535)> Command no class-map <class-map-number(1-65535)>...

  • Page 259: Show Class-Map

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots User Guidelines The access control list rule must be created before associating. switch(config-cmap)# match access-group mac-access-list 1 Example Command History Version History 1.00.001 This command was introduced show class-map To display the settings of class maps.

  • Page 260: Chapter 37 Policymap Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 37 Policymap Command Policymap Command List  policy-map  class   police  show policy-map policy-map To create or enter a policy map. policy-map <policy-map-number(1-65535)> Command no policy-map <policy-map-number(1-65535)>...

  • Page 261: Set

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots User Guidelines Class map must be created before associating. switch(config-pmap)# class 1 Example Existing Policy-map configurations have been deleted. Please apply the policy-map to make it active. switch(config-pmap-c)# Command History Version...

  • Page 262: Show Policy-Map

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch(config-pmap-c)# police 64 exceed-action drop Example Command History Version History 1.00.001 This command was introduced show policy-map To display the settings of a policy map. show policy-map [<policy-map-num(1-65535)>...

  • Page 263: Chapter 38 Rate Limiting Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 38 Rate Limiting Command Rate Limiting Command List  rate-limit egress  rate-limit ingress  show rate-limit rate-limit egress To enable and setup the egress packet rate limiting on a port. rate-limit egress [<rate-value(64~1000000)>] Command no rate-limit egress...

  • Page 264: Show Rate-Limit

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command Modes Interface Configuration Mode User Guidelines The no form is to disable the rate limiting on a port. switch(config-if)# rate-limit ingress 64 Example Command History Version History 1.00.001...

  • Page 265: Chapter 39 Storm Control Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 39 Storm Control Command Storm Control Command List  storm-control pkt-type storm-control pkt-type To enable and configure the details of the storm control function. storm-control pkt-type { broadcast-only | multicast-broadcast Command dlf-multicast-broadcast rate-level...

  • Page 266: Chapter 40 Qos Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 40 QoS Command QoS Command List  set dscp  vlan map-priority  dscp map-type  cosq scheduling algorithm  switchport priority default  show vlan traffic-classes ...

  • Page 267: Dscp Map-Type

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots priority value(0-7) Syntax Description Specify which priority to map. traffic-class Specify which switch queue to map. Traffic class value(0-3) Default Settings Priority Default traffic class Command Modes Global Configuration Mode switch(config)# vlan map-priority 0 traffic-class 1 Example...

  • Page 268: Switchport Priority Default

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots cosq scheduling algorithm { strict | wrr } Command strict Syntax Description The traffic in highest queue always process first. Using weighted round-robin algorithm to handle packets in priority queues.

  • Page 269: Show Vlan Port Config

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command Modes Privileged EXEC Mode switch# show vlan traffic-classes Example Traffic Class table --------------------- Priority Traffic Class --------- ------------- Command History Version History 1.00.001 This command was introduced show vlan port config To display the VLAN settings of ports show vlan port config [{port <interface-type>...

  • Page 270: Show Dscp

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Command History Version History 1.00.001 This command was introduced show dscp To display the current dscp setting. show dscp Command Command Modes Privileged EXEC Mode switch# show dscp Example DSCP is disabled Command History...

  • Page 271: Chapter 41 Rmon Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 41 RMON Command RMON Command List  set rmon  rmon alarm  rmon event  rmon collection history  rmon collection stats  show rmon set rmon To enable or disable RMON function.
  • Page 272 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots number (1-65535) Syntax Description Specify the alarm number. mib-object-id (255) The MIB OID to set alarm. sample-interval-time The time interval in seconds that alarm monitors (1-2147482647) the MIB variable.

  • Page 273: Rmon Collection History

    1. RMON function must be enabled and RMON event must be configured before configuring alarms. 2. Using no form to delete events from RMON event table. switch(config)# rmon event 1 description broadcast-too-high log Example owner trendnet trap redalert Command History Version History 1.00.001...

  • Page 274: Show Rmon

    Interface Configuration Mode User Guidelines 1. RMON function must be enabled and RMON event must be configured before configuring alarms. 2. Using no form to disable the statistics collection.. switch(config-if)# rmon collection stats 1 owner trendnet Example Command History Version History 1.00.001...
  • Page 275 RMON is enabled switch# show rmon statistics 1 alarms events history overview RMON is enabled Collection 1 on Fa0/5 is active, and owned by trendnet, Monitors ifEntry.1.5 which has Received 0 octets, 0 packets, 0 broadcast and 0 multicast packets,...

  • Page 276: Chapter 42 Statistics Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 42 Statistics Command Statistics Command List  clear interfaces  show ip traffic clear interfaces To clear counters of interfaces. clear interfaces [ <interface-type> <interface-id> ] counters Command interface-type Syntax Description...
  • Page 277 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show ip traffic Example IP Statistics: -------------- Rcvd: 1817 total, 0 header error discards 0 bad ip address discards, 12 unsupported protocol discards Frags: 0 reassembled, 30 timeouts, 0 needs reassembly 0 fragmented, 0 couldn't fragment Bcast: Sent: 0 forwarded, 2845 generated requests Drop:...

  • Page 278: Chapter 43 System Operation Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 43 System Operation Command System Operation Command List  watchdog  copy  ping  help  clear screen  lock  logout  cmdbuffs ...

  • Page 279: Ping

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots copy tftp://ip-address/filename flash: Command filename}{ tftp://ip-address/filename | flash: filename} tftp://ip-address/filename Syntax Description The IP address the remote tftp server and the filename you would like to copy from. flash: filename The path and filename of the local file you would like to copy from.

  • Page 280: Help

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots help To list all the command starting with the given keyword and also display the description of the command. help <command> Command command Syntax Description Specify which command you would like to get the help. Command Modes All Modes User Guidelines...

  • Page 281: Lock

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# clear screen Example Command History Version History 1.00.001 This command was introduced lock To lock the command line interface to prevent unauthorized user accessing the Switch.

  • Page 282: Show History

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots user name Syntax Description Specify which user to configure the buffer size. no.of buffers (1-200) Specify the number of buffer size. Command Modes Global Configuration Model switch(config)# cmdbuffs root 200 Example Command History...

  • Page 283: Space Memory

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots space flash: Command Command Modes Privileged EXEC Mode switch# space flash: Example Command History Version History 1.00.001 This command was introduced space memory: To display the space of DRAM remained space memory: Command Command Modes...

  • Page 284: Chapter 44 Interface Command

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Chapter 44 Interface Command Interface Command List  interface  shutdown   show interfaces  show interface mtu  show interfaces counters interface To create or enter a physical or logical network interface. interface { vlanMgmt | Port-Channel <port-channel-id(1-65535)>...

  • Page 285: Mtu

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots shutdown Command no shutdown Default Settings Interfaces had been created are active by default. Command Modes Interface Configuration Mode User Guidelines The no form reactivates the interface. switch(config-if)# shut down Example Command History...

  • Page 286: Show Interface Mtu

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots interface-type Syntax Description Specify the information of which interface to display. interface-id Interface-type including Fa (Fast Ethernet) or Gi (Gigabit Ethernet). Interface-id is slot/port number. description Display the link status and protocol status of the interface flowcontrol Display the flow control setting and pause frame statistic...

  • Page 287: Show Interfaces Counters

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots show interface mtu [{ Vlan <vlan-id (1-4094)> | port-channel Command <port-channel-id (1-65535)> <interface-type> <interface-id> }] Vlan vlan-id Syntax Description VLAN ID (1-4094) port-channel Port channel ID port-channel-id (1-65535) interface-type...
  • Page 288 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots switch# show interface fa 0/12 counters Example Port InOctet InUcast InDiscard InErrs InHCOctet ---- ------- ------- --------- ------ --------- Fa0/12 30159626 8763 30159626 Port OutOctet OutUcast OutDiscard OutErrs OutHCOctet...

  • Page 289: Technical Specifications

    24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Technical Specifications Hardware Standards IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X SX/LX IEEE 802.3x Flow Control and Back Pressure IEEE 802.3ad Link Aggregation/Port Trunking (LACP) IEEE 802.1d Spanning Tree (STP) IEEE 802.1w Rapid Spanning Tree (RSTP) IEEE 802.1s Multiple Spanning Tree (MSTP)
  • Page 290 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots DSCP (Differentiated Services Code Point) VLAN Asymmetric VLAN 802.1Q Tagged VLAN & Dynamic GVRP Up to 256 static/dynamic groups IGMP Support IGMP Snooping v1/2 Up to 64 multicast entries Port Mirror RX, TX, or both Security...

  • Page 291: Limited Warranty

    AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer.
  • Page 292 Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please go to http://www.gnu.org/licenses/gpl.txt...
  • Page 293 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots 44-10...

Table of Contents