Key Features - TRENDnet TL2-F7120 User Manual

TRENDnet User's Guide
• Diagnostic LED Indicators
Power LED
On (Green) : The device is receiving power and operating normally.
Blinking
The device is booting and performing a system self-test.
(Green)
Off : The device is not receiving power and turned off.
Fault LED
On : Indicates that there is a hardware issue with the device.
(Orange)
Off : Indicates no hardware issues detected and the device
hardware is operating normally.
10G SFP+ Slots 1-12 Speed / Link & Activity
•
On (Green) : The link speed is established at 10Gbps (10,000Mbps)
(Left side LED per slot)
On : The link speed is established at 1Gbps (1000Mbps).
(Orange)
(Left side LED per slot)
Blinking : The SFP/SFP+ slot is transmitting or receiving data.
(Right side LED per slot)
Off The SFP/SFP+ link is disconnected or not established.
© Copyright 2023 TRENDnet. All Rights Reserved.

Key Features

TL2-F7120
3