Table of Contents
Advertisement
TRENDnet User's Guide
Statistic group— This group is used to view port statistics remotely with SNMP
•
programs.
•
History group— This group is used to collect histories of port statistics to
identify traffic trends or patterns.
•
Event group— This group is used with alarms to define the actions of the
switch when packet statistic thresholds are crossed.
Alarm group—This group is used to create alarms that trigger event log
•
messages or SNMP traps when statistics thresholds are exceeded.
Event List
System > RMON > Event List
The RMON (Remote Monitoring) MIB is used with SNMP applications to monitor the
operations of network devices. This Event group is used with alarms to define the
actions of the switch when packet statistic thresholds are crossed.
1. Log into your switch management page (see
on page 9).
2. Click on System, click on RMON and click on Event List.
3. Click the Add button on the top right to enable RMON. Review and edit your settings.
Click Apply to save settings.
© Copyright 2023 TRENDnet. All Rights Reserved.
"Access your switch management
page"
•
Index: This parameter specifies the ID number of the new group. The range is 1
to 65535.
Event: Select the type of event that will trigger the alarm
•
Description: Provide a name for this rule
•
•
Owner: This parameter is used to identify the person who created an entry. It is
primarily intended for switches that are managed by more than one person,
and is an optional field
4. In the list, you can click Edit to modify an entry or click Delete or delete the entry.
Event Log Table
System > RMON > Event Log Table
Any RMON events that were triggered will be displayed here.
1. Log into your switch management page (see
on page 9).
2. Click on System, click on RMON, and click on Event Log Table.
TL2-F7120
"Access your switch management
page"
26
Advertisement
Table of Contents
