TRENDnet TL2-F7120 User Manual page 355

TRENDnet User's Guide
Parameter
Description
Mode
4.1.195 spanning-tree priority
Command Objective
Copyright 2023 TRENDnet. All Rights Reserved.
•
hold-count - This value specifies the maximum number of packets that
can be sent in a given hello time interval. This value ranges between 1
and 10.
Global Configuration Mode
This command configures the priority value that is assigned to the switch.
The no form of this command resets the priority to its default value. The
priority value is changed to its default value even if the spanning tree Mode
is changed.
In RSTP, this value is used during the election of root. In MSTP, this value is
used during the election of CIST root, CIST regional root and IST root.
TL2-F7120