Table of Contents
Advertisement
TRENDnet User's Guide
4.1.189
set sntp time-zone
Command Objective
Syntax
Parameter Description
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
This command sets the system time zone with respect to UTC. The
no form of command resets the system time zone to GMT.
set sntp client time-zone <UTC-offset value as (+HH:MM /-
HH:MM)(+00:00 to +14:00)/ (-00:00 to -12:00)> Eg: +05:30
no sntp client time-zone
+/-
- Sets the client time zone as after or before UTC. Plus indicates
⚫
forward time zone and minus indicates backward time zone.
•
UTC-offset value
as - Sets the UTC offset value in hours
-
+00:00 to +14:00
-
-00:00 to -12:00
SNTP Configuration Mode
TL2-F7120
Advertisement
Table of Contents
