TRENDnet TL2-F7120 User Manual page 78

TRENDnet User's Guide
Command Access Method
Mode
Privileged
This is the initial
EXEC
mode to start a
session.
Global
The EXEC mode command
Configuratio
configure terminal is used
n
to
enter the Global
Configuration mode.
Interface
The Global
Configuratio
Configuration mode
n
command interface
<interfacetype><interfacei
d>
is used to enter
the Interface
configuration
mode.
© Copyright 2023 TRENDnet. All Rights Reserved.
Pro
mpt
<Switch Name>#
<Switch Name> (config)#
<Switch Name> (config-if)#
Interface
The Global
Range
Configuration mode
Mode
command interface
range
( {
<interfacetype><slot/port-
port>}
{vlan <vlan-id(1-4094)>-
<vlan-id(2- 4094)>}) is
used to enter the
Interface range mode.
SNTP
The SNTP Configuration
Configuratio
mode command sntp is
n
used to enter the SNTP
configuration mode.
Config-
The Global
VLAN
configuration mode
command vlan vlan-id
is used to enter the
Config-VLAN mode.
TL2-F7120
<Switch Name> (config-if-range)#
<Switch Name> (config-sntp)#
<Switch Name> (config-vlan)#
74