TRENDnet User's Guide
Parameter
Description
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
•
tcp
- Transport Control Protocol.
•
any | host <ip6_addr> <integer(0-128)>
/ any host
•
eq <short (1-65535)>
- Port Number.
•
any | host <ip6_addr> <integer(0-128)>
host / any host.
•
ace-priority <integer (1-2147483647)>
used to decide which filter rule is applicable when the packet
matches with more than one filter rules.
•
ack | non_ack
-
TCP ACK bit to be checked against the packet.
•
rst | non_rst -
TCP RST bit to be checked against the packet.
•
psh | non_psh -
TCP PSH bit to be checked against the packet.
•
urg | non_urg -
TCP URG bit to be checked against the packet.
•
syn | non_syn -
TCP SYN bit to be checked against the packet.
•
fin | non_fin -
TCP FIN bit to be checked against the packet.
•
dscp <short (0-63)>
- Differentiated services code point provides the
quality of service control.
IPV6 ACL Extended Access List Configuration Mode
- Source address of the host
- Destination address of the
- The priority of the filter is
TL2-F7120