TRENDnet User's Guide
4.1.96
ip igmp querier-timeout
Command Objective
Syntax
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
Port Purge Interval is 262 seconds
Max Response Code is 120, Time is 12 seconds
This command sets the IGMP snooping router port purge time-out interval.
Snooping learns the available router ports and initiates router port purge
time-out timer for each learnt router port. The routers send control messages
to the ports. If the router ports receive such control messages, the timer is
restarted. If no message is received by the router ports before the timer
expires, the router port entry is purged. The purge time-out value ranges
between 60 and 600 seconds.
This command is a standardized implementation of the existing command;
ip igmp snooping mrouter-time-out. It operates similar to the existing
command.
ip igmp querier-timeout <(60 - 600) seconds>
Global Configuration Mode
TL2-F7120