TRENDnet User's Guide
Command Objective
Syntax
Parameter
Description
Mode
4.1.109
show ipv6 interface
Command Objective
Syntax
Copyright 2023 TRENDnet. All Rights Reserved.
This command configures the IPv6 link-local address on the interface. The
link-local address is an IP address that is intended only for communications
within the segment of a local network (a link) or a point-to-point
connection.
ipv6 address <prefix> link-local
no ipv6 address <prefix> link-local
•
<prefix>-Configures the IPv6 prefix for the interface.
Interface Configuration Mode
This command displays the IPv6 interfaces.
show ipv6 interface [{vlan <vlan-id> [prefix]}]
TL2-F7120