TRENDnet User's Guide
Mode
54
permit udp
Command Objective
Syntax
Copyright 2023 TRENDnet. All Rights Reserved.
IPV4 ACL Extended Access List Configuration Mode
This command specifies the UDP packets to be forwarded based on the
associated parameters.
permit udp { any| host <src-ip-address>|<src-ip-address> <mask> } [eq
<short (1-65535)> ] { any|host <dest-ip-address>|<dest-ip-address>
<mask> } [ eq <short (1-65535)> ] ace-priority <integer (1-
2147483647)> [ dscp <short (0-63)>]
TL2-F7120