TRENDnet User's Guide
4.1.72
ipv6 access-group
Command Objective
Syntax
Parameter
Description
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
This command enables ipv6 access control for the packets on the
interface.
The no form of this command removes all access groups or the
specified access group from the interface.
Ipv6 access-group <string (31)> in
no ipv6 access-group [<string(31)>] in
•
<string(31)>
- IPv6 access control list name.
Interface Configuration Mode
TL2-F7120