Table of Contents
Advertisement
TRENDnet User's Guide
Command Objective
Syntax
Parameter
Description
Copyright 2023 TRENDnet. All Rights Reserved.
This command displays all static / dynamic unicast and multicast MAC entries
created in the MAC address table. These entries contain VLAN ID, unicast /
multicast MAC address, unicast backbone MAC address of peer backbone
edge bridge, member ports, the type of entry (that is static, learnt and so on),
and total number of entries displayed.
show mac-address-table [vlan <string(9)>] [address <mac_addr>]
[{interface
<interface-type>
<ifnum> | switch <string(32)>}]
•
vlan
<vlan-range>- Displays all static / dynamic unicast and multicast
MAC entries created in the MAC address table for the specified VLANs
alone. This value denotes the VLAN ID range for which the entries need
to be displayed. This value is a string with the maximum size as 9. For
example, the value is provided as 4000-4010 to display the entries for
VLAN IDs from 4000 to 4010.
TL2-F7120
Advertisement
Table of Contents
