TRENDnet TL2-F7120 User Manual page 159

TRENDnet User's Guide
4.1.60 deny ipv6
Command Objective
Syntax
Parameter
Description
Copyright 2023 TRENDnet. All Rights Reserved.
This command specifies IPv6 packets to be forwarded based on
protocol and associated parameters.
deny ipv6 {any | host <ip6_addr> <integer(0-128)> } { any | host
<ip6_addr> <integer(0-128)> } ace-priority <integer (1-2147483647)> [dscp
<short(0-63)>]
•
ipv6 – Ipv6 protocol.
•
any | host <ip6_addr> <integer(0-128)>
/ any host.
•
any | host <ip6_addr> <integer(0-128)>
the host / any host.
•
ace-priority <integer (1-2147483647)>
to decide which filter rule is applicable when the packet matches with
more than one filter rules.
•
dscp <short (0-63)> - Differentiated services code point provides
the quality of service control.
- Source address of the host
- Destination address of
- The priority of the filter is used
TL2-F7120