Table of Contents
Advertisement
TRENDnet User's Guide
Syntax
Parameter
Description
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
ip address <ucast_addr> <ip_mask>
no ip address <ucast_addr>
•
ucast_addr
- Sets the IP address for an interface. If the network in which
the switch is implemented contains a server such as DHCP server,
dynamically allocating IP address, the configured IP address should not
be within the range of the addresses that will be allocated by the server
to the other switches. This precaution
avoids creation of IP address conflicts
•
ip_mask
- Sets the subnet mask for the configured IP address. The
configured subnet mask should be in the same subnet of the network in
which the switch is placed.
Interface Configuration Mode
This command is applicable in VLAN Interface Mode / OOB Interface
Mode.
between the switches.
TL2-F7120
Advertisement
Table of Contents
