TRENDnet User's Guide
Syntax
Mode
4.1.130
ipv6 mld snooping mrouter
Command Objective
✏
Copyright 2023 TRENDnet. All Rights Reserved.
ipv6 mld snooping query-interval <(60 - 600) seconds>
no ipv6 mld snooping query-interval
Config-VLAN Mode
This command configures statically the router ports for a VLAN.
The no form of this command deletes the statically configured router ports
for a VLAN. By default the router port list is set to none.
The configuration can be done only for the VLANs that are activated in
the switch.
The specified interface can be set as router ports for the VLAN, only if the
interfaces are configured as member ports for that VLAN.
TL2-F7120