TRENDnet User's Guide
4.1.91
ipv6 mld snooping querier
Command Objective
✏
Syntax
Copyright 2023 TRENDnet. All Rights Reserved.
This command configures the MLD snooping switch as a querier for a specific
VLAN. The switch starts sending general queries at regular time intervals.
When the router port gets operationally down and there are no router ports
in the switch, the switch continues the querier functionality.
The no form of this command configures the MLD snooping switch as non-
querier for a specific VLAN.
The configuration can be done only for the VLANs that are activated in
the switch.
ipv6 mld snooping querier <(60 - 600) seconds>
no ipv6 mld snooping querier
TL2-F7120