TRENDnet TL2-F7120 User Manual page 79

TRENDnet User's Guide
Line Configuration
The Line Configuration mode
command line cli is used to enter
the Line configuration mode.
IPV4 ACL Extended
The IPV4 ACL Extended Access List
Access List Configuration
configuration mode command ip
access-list extended <name>
used to enter the IPV4 ACL
Extended Access List configuration
mode.
IPV6 ACL Extended
The IPV6 ACL Extended Access List
Access List Configuration
configuration mode command ipv6
access-list extended <name>
used to enter the IPV6 ACL
Extended Access List configuration
mode.
MAC ACL Extended
The MAC ACL Extended Access List
Access List Configuration
configuration mode command mac
access-list extended <name>
used to enter the MAC ACL
Extended Access List configuration
mode.
© Copyright 2023 TRENDnet. All Rights Reserved.
<Switch
Name>
Configuration Mode
(config-
line)#
<Switch
Name>
MSTP Configuration
(config-
is
ext-nacl)#
<Switch
Name>
(config-
is
ipv6-acl)#
<Switch
Name>
(config-
is
ext-macl)#
Policy Map
The Policy Map configuration mode
command class-policy <name> is
used to enter the Policy Map
configuration mode.
The MSTP Configuration mode
Mode
command spanning-tree mst
configuration is used to enter the
MSTP configuration mode.
TL2-F7120
<Switch
Name>
(config-qc-
ply)#
<Switch
Name>
(config-
mst)#
75