TRENDnet TL2-F7120 User Manual page 130

TRENDnet User's Guide
41 show ip interface
Command Objective
Syntax
Parameter
Description
•
<interface-id> - Displays the IP interface configuration for the specified interface identifier. This is a unique value that represents the specific interface. This
value is a combination of slot number and port number separated by a slash. For Example: 0/1 represents that the slot number is 0 and port number is 1.
Copyright 2023 TRENDnet. All Rights Reserved.
This command displays the IP interface configuration.
show ip interface [{[Vlan <vlan-id(1-4094)> | [<interface-
type><interface-id>]
•
Vlan<vlan-id(1-4094)> - Displays the IP interface configuration for the
specified VLAN ID. This is a unique value that represents the specific
VLAN created. This value ranges between 1 and 4094.
•
<interface-type> - Displays the IP interface configuration for the
specified type of interface. The interface can be:
■
gigabitethernet – A version of LAN standard architecture that
supports data transfer upto 1 Gigabit per second.
TL2-F7120