TRENDnet TL2-F7120 User Manual page 230

TRENDnet User's Guide
4.1.91
lldp reinitialization-delay
Command Objective
Syntax
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
This command sets the reinitialization delay time which is the
minimum time an LLDP port will wait before reinitializing LLDP
transmission. The value ranges between 1 and 10 seconds.
The no form of the command sets the reinitialization delay time to the
default value.
lldp reinitialization-delay <seconds(1-10)>
no lldp reinitialization-delay
Global Configuration Mode
TL2-F7120