TRENDnet User's Guide
Mode
4.1.57
deny icmp
Command Objective
Copyright 2023 TRENDnet. All Rights Reserved.
•
type <short (0-255)>
-
message type
•
code <short (0-255)>
- message code
•
ace-priority <integer (1-2147483647)>
to decide which filter rule is applicable when the packet matches with
more than one filter rules.
•
dscp <short (0-63)>
- Differentiated services code point provides
the quality of service control.
IPV4 ACL Extended Access List Configuration Mode
This command specifies the ICMP packets to be rejected based on the IP
address and associated parameters.
- The priority of the filter is used
TL2-F7120