TRENDnet TL2-F7120 User Manual page 320

TRENDnet User's Guide
Command Objective
Syntax
Parameter
Description
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
This command configures SNMP group details.
The no form of the command removes the SNMP group details.
snmp group <GroupName> user <UserName> security-model {v1 | v2c
| v3 }
no snmp group <GroupName> user <UserName> security-model {v1 | v2c |
v3 }
•
<GroupName> - Creates a name for an SNMP group
•
user<UserName> - Sets an user for the configured group.
•
security-model - Sets the security model for SNMP
■ v1 - Sets the SNMP version as Version 1.
■ v2c - Sets the SNMP version as Version 2.
■
v3 - Sets the SNMP version as Version 3.
Global Configuration Mode
TL2-F7120