Table of Contents
Advertisement
TRENDnet User's Guide
4.1.149
Rate-limit
Command Objective
Syntax
Parameter
Description
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
This command enables the rate limiting on an interface.
The no form of the command disables the rate limiting.
rate-limit { output | input } [<integer(1-80000000)>] no
rate-limit { output | input }
•
output
– egress limitation.
•
input
–ingress limitation.
•
<integer(1-80000000)>
-Line rate in kbps.
Interface Configuration Mode
TL2-F7120
Advertisement
Table of Contents
