Led Pointer Position Adjustment - Roland VersaUV LEF2-200 Service Notes

LED Pointer Position Adjustment

Information
Necessary tools
General tools
Clear film for test print
Special tools
1000005829 TOOL,VINYL YE UV RESISTANT ST-113
Typical work time
Contents of work
LED Pointer Position Adjustment
Workflow
C AUTION
• To prevent hardened ink from entering into the nozzle, refresh print head before the adjustment . Perform medium
cleaning on all print heads if 20 minutes passes .
FUNCTION
CLEANING
MEDIUM CL.
• Always use the UV protection sheet during this adjustment, or ink will harden and clog inside the ink line .
NOTE
• This adjustment is required when the LED pointer is replaced .
• This adjustment is to adjust the position of the print head and the LED pointer .
Time
5 min .
FUNCTION
CLEANING
MEDIUM CL.
AB
2-59
2
L EF 2-200