Roland VersaUV LEF2-200 Service Notes page 104

Carriage Belt Replacement
19.
Bundle the ink tubes with the clamps . Bundle the ink tubes with the clamps while pushing the ink tubes backward so as
not to locate the front of the print-head carriage .
C AUTION
If you do not bundle the ink tubes, they will pull up the print head, and the print head will be tilted .
No. 1～2
No. 1～4
20.
Attach the print carriage board, and plug the connectors and connect the ribbon cables .
21.
Attach the print carriage board cover .
C AUTION
Attach the print carriage board cover by pushing the part indicated by the arrows because the top part of the support is
easy to break .
22.
Perform the following adjustments .
22-1.
Chapter 2 "Belt Tension Adjustment"
22-2.
Chapter 2 "Belt Position Adjustment"
22-3.
Chapter 2 "Limit position & maximum scan width position initialize"
No. 3～4
No. 3～6
No. 7～8
No. 5～8
No. 1～4
No. 5～8
1-97
1
L EF 2-200