Belt Position Adjustment - Roland SOLJET PRO III XJ-540 Service Notes

4-11 BELT POSITION ADJUSTMENT

This adjustment is to prevent the belt wear which is caused by the belt contacting with the pulley
flanges excessively. The belt position needs to be confirmed after the Belt Tension Adjustment and
adjusted if it is necessary.
Remove the following covers.
1
Right I/S Cover
Top Cover
Right Top Cover
Front Rail Cover
Front Cover
Left I/S Cover (XJ-740 only)
Confirm that the Belt Tension Adjustment is completed
2
and turn on the Main Power SW.
Turn on the Sub Power SW while pressing [
3
and [ ] keys to enter the Service Mode.
(Referential Time : 30min.)
Left I/S Cover
Front Cover
Main Power SW
< Rear view >
], [ ]
4-49
Front Rail Cover
Top Cover
Right Top Cover
+
MENU
MENU
SERVICE MENU
Right I/S Cover