Roland VersaUV LEF2-200 Service Notes page 59

Ink Tube Replacement
5.
Remove the ink tubes from the damper joints and the Y-tube joints . Put tape on the tip of the ink tubes to prevent ink from
coming out .
6.
Release the ink tubes from the clamps .
7.
Remove the ink tubes from the damper joints and the Y-tube joints . Put tape on the tip of the ink tubes to prevent ink from
coming out . Then, put clear tape on the tip of the ink tubes to prevent ink from coming out .
Do not replace thse ink tubes.
Do not replace thse ink tubes.
1-52
1
L EF 2-200