Roland VersaUV LEF2-200 Service Notes page 147

Service mode
SUB MENU
HEAD WASH
SUB MENU
PERIODIC CL.
SUB MENU
PR MAINTE MODE
SUB MENU
CL.AFTER PRINT
SUB MENU
MIST FAN CHECK
SUB MENU
OPTION V CHECK
SUB MENU
CLOCK
SUB MENU
DIP SW CHECK
SUB MENU
KEY CHECK
HEAD WASH
A B
REMOVE CARTRIDGE
123456
Goes next,
when cartridge is removed
Print head cleaning
Washes print heads.A to B shown on the lower LCD are the head groups. Cursor can be moved with [left] and [right] keys.
Use [up] and [down] keys for ON/OFF. By pressing [ENTER] key, head washing is started for the selected head group.To exit
the menu, press [left] key when the cursor is on A.
NOTE: When this is performed on individual head group, the normal maintenance operations cannot be performed.
Regularly, HEAD WASH is performed on the two groups together. When needing the
head wash individually, ll it with the same type of ink from FILL INK menu immediately.
PERIODIC CL.
LIGHT LIGHT
※THis menu is displayed only when ink type ECO-UV CMYKPrW or ECO-UV4 CMYKPrW is selected.
PR MAINTE MODE
LIGHT NORMAL
CL.AFTER PRINT
NONE 180 min.
MIST FAN CHECK
MIST FAN
Mist fan check
This menu is to check FANs. Select a fan type with [up] and [down] keys.
Press [ENTER] key for ON/OFF of fans. Fan turns o automatically when exiting this menu.
OPTION V CHECK
[*]
Option vacuum table connection check
This menu is to check connection of vacuum table. (optional item)
If the vacuum table is connected [*], if not connected [ ]
CLOCK
DATE
CLOCK
TIME
Date and time setting
This menu is to display and edit the date and time. When it detects the battery exhaustion, [B] is indicated on the time display. In this case,
battery needs to be replaced. However, [B] does not disappear automatically when the battery is replaced. [B] is deleted, when the time is
newly set up with [ENTER] key on the time edit menu.
When the real time clock is not active due to battery exhaustion, the maintenance operation may be performed improperly, such that it
performs cleaning every time the main power is turned on. The time set here is used for periodic maintenance operations and the time record
of event log function. Be aware that it a ects the maintenance operations if the time is changed.
When this setting is changed, it is recorded on event log. The time before change is used for the log time, and the new time is recorded as an information.
DIP SW CHECK
001100
bit # [ 1 2 3 4 5 6 ]
DIP switch check
This menu is to check dip switch. It displays the real-time status of the No.1 to 6
from the left. [0] is OFF and [1] is ON.
KEY CHECK
NONE
Key check
This menu is to check the operation of panel keys. On this menu, it shows [NONE] on the lower LCD when any key has not been pressed. It
shows the key name when some key is pressed. And it shows a message of [KEY ERROR] when two keys or more are pressed at the same
time, and it is considered that no button is pressed. You can exit this menu with the [left] key. Therefore, the [left] key needs to be the last
button to be pressed in order to check all keys. As long as the [left] key is pressed at the last, the order of pressing other keys can be
random. When it is left without pressing any key for 10 seconds, or pressing the [left] key, it exits this menu. At this time, the
names of the keys that never been pressed are displayed with a buzzer. This means that if a buzzer does not go o when exiting, all keys are
checked properly. The power cannot be turned o with the sub power key while performing this menu.
EMPTY
DRAIN BOTTOLE
Pressing ENTER key resets drain count
SET CL-LIQUID WASHING HEAD...
123456
>>>>>
Goes next,
when cleaning cartridge is set
REMOVE CL-LIQUID WASHING HEAD...
>>>>>
123456
Goes next, Goes next, when completed
when cleaning cartridge is removed
Automatic cleaning during printing
This menu is to select the type of periodic cleaning which is automatically performed during printing.
Options: WIPE/LIGHT/NORMAL/MEDIUM Default: NORMAL
WIPE: Wiping and ushing only
LIGHT: Wiping and light evacuation (lighter than regular cleaning) only
NORMAL/MEDIUM: The regular cleanings that can be executed from the control panel
Cleaning period can be set up in PERIODIC CL. menu of the user menu.
PR Mainte mode
This menu is set automatic cleaning during printing.
Cleaning is performed only on rint head group with Pr ink only.
Range: LIGHT/NORMAL
Default: LIGHT
Automatic cleaning after printing
This menu is to set automatic cleaning after printing.
Range ： NONE, 30, 60, 90, 120, 150, 180分
Default: NONE
When the set printing time has passed, cleaning is peformed automatically after printing is nished.
DATE DATE
11/09/10 11/09/10
Display
[Year/Month/Day]
[Year/Month/Day]
TIME
TIME
01:01:59
01:01:59
Display
TIME
TIME
01:01:59 B
01:01:59
2-6
Edit
Edit
It shows [B], when
B
battery is dead.
L EF 2-200
2