Linear Encoder Board Replacement
C AUTION
When tightening the two screws on the front, be careful not to tighten them too hard . Doing so may cause the carriage
cover to be distorted and the print heads may become shifted .
Workflow
C AUTION
• To prevent hardened ink from entering into the nozzle, refresh print head before the replacement . Perform medium
cleaning on all print heads if 20 minutes passes .
FUNCTION
CLEANING
MEDIUM CL.
• Always use the UV protection sheet during this adjustment, or ink will harden and clog inside the ink line .
1.
Unlock the print-head carriage, and move it to the left by hand . Remove the print-head carriage cover .
FUNCTION
CLEANING
MEDIUM CL.
AB
1-103
1
L EF 2-200