Roland VersaUV LEF2-200 Service Notes page 269

Installation Checklist
□ □
Ink filling
□ □
Network settings
□ □
Setting jig plate
If you use a jig, set the height of head refresher.
Upgrading the
firmware
Upgrade the firmware to the latest version .
Installing VersaWorks
Refer to VersaWorks Installation Guide and install VersaWorks .
□ □
Connecting to Roland@NET
Get permission from the user and change the settings so that the software will be automatically updated and notified.
□ □
Power-saving setting on computer
Turn off the computer's power-saving functions which make the computer go standby or sleep.
It may stop a job being output.
Installing OnSupport
Refer to the Startup Guide and install Roland OnSupport .
□ □
Basic operations
How to display OnSupport Help
□ □
Environmental settings (language/network)
Checking the network connection
C AUTIO N
To fully utilize OnSupport, you need to connect your computer to our OnSupport server via the Internet. If your computer is linked to
the Internet, you will enable its connection to our OnSupport server only by installing OnSupport.
Setting the e-mail server
What is "OnSupport Mail"?
IP address of the computer
IP address of the printer
5-4
5
L EF 2-200