Roland VersaUV LEF2-200 Service Notes page 30

Cap Top Replacement
7.
Remove the tube from the cap to, and attach a new cap top so that the tube side faces the front .
C AUTION
Make sure to observe the following points:
• Do not touch the tip of the rubber .
• Make sure that the spring is properly attached under the cap top .
• Do not bend the tube .
8.
Attach the cap frame .
9.
Move the cap top left and right with your hand, and confirm that the cap top does not move up and down by cap top tube
being pulled .
1-23
1
L EF 2-200