Flushing Position Adjustment - Roland VersaEXPRESS RF-640 Service Notes

4-6 FLUSHING POSITION ADJUSTMENT (Referential Time : 5min.)
This is to adjust the fl ushing position. Without this adjustment, the fl ushing may not be performed properly and
that can cause ink fi ring problem.
Turn off the Sub Power SW, and then turn off the Main Power
1
SW.
The Head height should be set to LOW.
2
Remove the Right Cover.
3
Move the Head Carriage leftwards to the position where it is
4
not above the Capping Unit.
OFF
Right Cover
4-29