Roland VersaUV LEF2-200 Service Notes page 125

Ink Damper Replacement
5.
Attach the ink dampers to the adapter damper of the print head .
C AUTION
• Ink dampers may break if you grasp them too hard .
• Attach the ink dampers with the head board cover attached . If ink drips on the head board, the print head or the head
driving IC will break .
NOTE
Attach the ink dampers according to the color mark on the ink tubes .
WH
GL PR or
6.
Attach the head shield .
NOTE
Insert the head shield between the head board and the head adapter . Place it so that the screws can be seen from the screw
holes .
1 . Head board
2 . Head adapter
3 . Head shield
3
1
YE
CY
BK
MG
or
WH
2
1-118
1
L EF 2-200