Roland VersaUV LEF2-200 Service Notes page 137

Feed Motor Replacement
1.
Turn on the main power switch . Then, turn on the sub power switch while pressing the [] [] [] keys to enter the
service mode .
MENU
SERVICE MENU
2.
Select [SERVICE MENU] > [MOTOR MENU] > [AXIS MOVE] > [FEED], and set the value to [Y: 2 .8 mm] to move the table unit
to the rear .
SERVICE MENU
MOTOR MENU
MOTOR MENU
AXIS MOVE
AXIS MOVE
FEED
AXIS MOVE
Y:2.8mm
3.
Turn off the power switch and remove the cover .
4.
Remove the spring that secure the double-gear .
+
MENU
[ ] [ ]
[ ]
[ ]
[ ]
1
1 . Double-gear
1-130
1
L EF 2-200