Roland VersaUV LEF2-200 Service Notes page 205

Print Area Adjustment
4.
Loosen the screws that secure the table plate .
C AUTION
Do not loosen the screw that secure the lower right screw hole of the table plate .
5.
Perform [SERVICE MENU] > [MOTOR MENU] > [AXIS MOVE] > [HEIGHT] and set the Height to 100 .8 mm, then unlock the
print-head carriage and move it leftwards by hand .
C AUTION
Do not press [ENTER] key .
SERVICE MENU
MOTOR MENU
[ ][ ]
MOTOR MENU
AXIS MOVE
[ ]
AXIS MOVE
HEIGHT
[ ]
AXIS MOVE
Z:100.8mm
Print area
2-64
2
L EF 2-200