Roland VersaUV LEF2-200 Service Notes page 25

Wiper Replacement
NOTE
Clean ink on the wiper frame and the scraper with a cleaning stick .
5.
Attach new wipers .
C AUTION
Insert the wipers with the orientation shown in the figure .
6.
Use tweezers to press the area shown in the figure, and attach the wipers to the hooks .
C AUTION
Make sure the wipers catch on the hooks . If the wipers are not hooked, they may fall off during operation .
7.
Close the front cover . Press the [ENTER] key .
8.
The head carriage moves back to the standby position, and the print head cleaning starts automatically . When the
cleaning is finished, the screen shown in the figure appears .
MAINTENANCE
REPLACE WIPER
Front
1-18
1
L EF 2-200