Roland VersaUV LEF2-200 Service Notes page 44

Pump Replacement
7.
Attach a new pump unit to the motor . Replace the other pump in the same way .
8.
Attach the pump unit to the stay, and attach them to the machine .
9.
Connect all the ink tubes to the pumps . Then, plug in the connector .
C AUTION
• Connect the ink tubes from the cap top to the right joint, and connect the ink tubes from the drain side to the left joint .
• Insert the ink tubes firmly . Make sure that the ink tubes at the drain side are inserted into the bottle cap .
• Be careful not to connect a wrong cable . Connect the red cable to the pump A, and the orange cable to the pump B .
A A B B
1-37
1
L EF 2-200