Front Cover Sensor Adjustment
11-1.
Change the degree of adjustment screw rotation depending on the position of the front cover when the front cover
sensor still clicks .
" Check the position of the lower edge of the front cover when the sensor clicks, and adjust the amount of screw loosening
in step 9 .
• When the lower edge of front cover is higher than the under cover, loosen the adjustment screw less than half .
• When the lower edge of front cover is lower than the top edge of the front cover cushions, loosen the adjustment screw
more than a half .
12.
(End of procedure)
2-107
2
L EF 2-200